1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Level 2 (240 volt) chargers

Discussion in 'Prime Plug-in Charging' started by timthecyclist25, Nov 29, 2019.

?

Which level 2 charger would you go for?

  1. MAX GREEN (25ft) $254.99

    0 vote(s)
    0.0%

  2. QC-charge (25ft) $197

    1 vote(s)
    100.0%
Multiple votes are allowed.
  1. timthecyclist25

    timthecyclist25 Member

    Joined:
    Oct 25, 2011
    47
    27
    0
    Location:
    Wetumpka, AL
    Vehicle:
    2007 Prius
    Model:
    Base
    I'm looking to purchase a level 2 charger. Unfortunately, My wife and I put our house up for sale, so having a permanent 240 volt plug install just doesn't seem like a good idea. Our washer and dryer is right next to the garage, so I figured I would go with a 14-30 plug charger. Which is what my dryer plug is.
    Anyway, I have been researching and looking at all the options available on amazon. I found two models that I have narrowed down too. links below.





    One is about $50 bucks cheaper but doesn't have the best reviews. I contacted the company, in an attempt to get a military discount and I promised to do a youtube video on their product. They politely refused to give a discount. I like how you can switch to different plugs. I'm mainly interested in this due to visiting my mother who has a 240 volt 10-30 plug. Would be nice to charge my prime while visiting her. She lives 60 miles away. So, I usually visit her about once a week. Thank you for your suggestions and I appreciate your feedback. Thanks
     
    #1 timthecyclist25, Nov 29, 2019
  2. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    20,173
    8,353
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    Many here have discovered that their Prius (& some Chevy 120v portable) chargers actually work on 240v as well, especially since these vehicles for the most part will only pull 3600 Watts Max. Do a search here and you'll find the threads confirming. All you need to do is modify an adapter plug so that it will work. This way you'll save a boatload of money. No need to worry about a more powerful L2 evse until you get a car that pulls real power.

    .
     
    #2 hill, Nov 29, 2019
    Last edited: Nov 29, 2019
  3. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,871
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Ah, hill beat me.
    @Rob43 sells a 240 to 120 volt adapter. Tell him you want NEMA 10-30P to NEMA 5-20R adapter of x feet. (long enough you don't need to get behind the dryer all that often) It should have warning stickers on it that this is NOT a 120 Volt outlet like it looks but is High Voltage. Then plug your existing 5.5 hour 120 volt cable into the adapter and you have a 2.5 hour 240 volt cable.

    This is still only 12 Amps, and so is not quite as fast as the 16 Amp Level 2 adapters you were going to spend hundreds on, but @Rob43 is likely to charge you $50. (I do not speak for him)

    He does good work.
     
    #3 JimboPalmer, Nov 29, 2019
    Rob43 likes this.
  4. Rob43

    Rob43 Senior Member

    Joined:
    Sep 24, 2014
    1,373
    1,048
    0
    Location:
    VA, BMW Race Car, BMW R1200R, BMW 330Ci, Ford F350
    Vehicle:
    2013 Prius v wagon
    Model:
    Prime Advanced
    Hi Tim,

    IMO the answer between your two choices is neither, they're both expensive and not exactly well built*. Your Toyota OE EVSE unit is a masterpiece internally and weighs two to three times as much as the Chinese EVSE's, Toyota builds it as a worldwide unit so it works equally as well at 240 volts. Your charge up time from 0 to 100% will be 2:28 minutes when you use a 240v adapter. If you want a perfect working 240v Rob43 adapter(s), just let me know.

    Using the Primes 120v Charger at 240 Volts, Cost $20 !!! | Page 9 | PriusChat


    Rob43

    * The China built units have extremely tight fitting charge handles that are a PIA to plug in and out. The unit I opened up and examined had several "cold" solder joints on the circuit board, it looked hand built.
     
    #4 Rob43, Nov 29, 2019
    Last edited: Nov 29, 2019
    Damos likes this.
  5. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,871
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Ha! I claimed 2.5 hours and Rob43 claims 2 hours and 28 minutes. We do not disagree by much!
     
    #5 JimboPalmer, Nov 29, 2019
  6. Tha_Ape

    Tha_Ape Active Member

    Joined:
    Apr 9, 2019
    271
    161
    0
    Location:
    Washington, DC
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    FWIW, I just started running mine down to 0% daily now and it takes 1:50 to get to full charge @240V/16A.

    If you plan on preconditioning your car, the extra amps help
     
    #6 Tha_Ape, Jan 2, 2020
(You must log in or sign up to post here.)