1. Attachments are working again! Check out this thread for more details and to report any other bugs.

LED Light solution for main compartment under center console

Discussion in 'Gen 3 Prius Accessories and Modifications' started by pakitt, Jan 9, 2010.

  1. pakitt

    pakitt Senior Member

    Joined:
    Aug 10, 2009
    2,173
    1,312
    0
    Location:
    Colorado
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    Since the main compartment under the central console is completely dark during the night and not even the reading lights can help, and since Toyota has thought that adding 2 LEDs for the footwell illumination was absolutely necessary, while instead digging with your hand in the compartment underneath the console guessing where your stuff is, while driving, is perfectly OK, I took matters in my hands and found a neat lighting solution, see pics for details. What do you think?
    You can find more detail about the OSRAM DOT-it LED Light solution I used here.
    I used the velcro solution to attach it (included from OSRAM), so that I can also use the light elsewhere in the car if necessary. ;)
    Where I put the LED light was the only section of plastic flat enough to keep the light stay put - everywhere else the plastic is too rounded and you do need a flat surface to put the DOT-it.
     

    Attached Files:

    #1 pakitt, Jan 9, 2010
  2. scottwyden

    scottwyden new jersey photographer

    Joined:
    Apr 19, 2009
    342
    19
    21
    Location:
    New Jersey
    Vehicle:
    2010 Prius
    Model:
    IV
    The fabric is holding the the light ok? I've tried this in other cars and it wouldn't hold
     
    #2 scottwyden, Jan 9, 2010
  3. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Perfect...now you can see your candy...:D
     
    #3 stream, Jan 9, 2010
  4. Paradox

    Paradox Prius Enthusiast / Moderator
    Staff Member

    Joined:
    Sep 22, 2005
    29,110
    8,591
    201
    Location:
    USA
    Vehicle:
    2014 Prius v wagon
    Model:
    Five

    Don't use the velcro which has the fabric... Use the kind that 'interlocks' like the tabs which come with the EZ Pass (If you've got an EZ Pass you know what I'm talking about - Since your from NJ you may have one)... Once you snap the two peices together they won't come apart unless pulled apart.
     
    #4 Paradox, Jan 9, 2010
    1 person likes this.
  5. R2Pre2

    R2Pre2 Feel the Force!

    Joined:
    Nov 1, 2009
    111
    24
    2
    Location:
    SF Bay Area
    Vehicle:
    2018 Prius Prime
    Model:
    Plug-in Advanced
    Great solution!

    I used a similar but smaller LED light, a "Mighty Bright Mini Tap Light," mounted to the ceiling overhanging the console. It's easily accessible and tapped on when needed. The ceiling surface is a bit curved but the light has a smaller surface area so I was able to securely affixed it with double stick tape.

    Better than being in the dark.

    I want candy!
     
    #5 R2Pre2, Jan 9, 2010
  6. DetPrius

    DetPrius Active Member

    Joined:
    Apr 24, 2009
    545
    92
    0
    Location:
    Southeast Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    Riiiicolaaaaaaaa!!!!!!!
     
    #6 DetPrius, Jan 9, 2010
  7. rrolff

    rrolff Prius Surgeon

    Joined:
    Aug 19, 2009
    1,610
    246
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    III
    You can also mount an LED *under* the bridge. The plastic that covers the top (around shifter etc) just pops off - then there is plenty of access to run wires, or drill a small hole...
     
    #7 rrolff, Jan 9, 2010
  8. scottwyden

    scottwyden new jersey photographer

    Joined:
    Apr 19, 2009
    342
    19
    21
    Location:
    New Jersey
    Vehicle:
    2010 Prius
    Model:
    IV
    Got it!! Thanks!!
     
    #8 scottwyden, Jan 9, 2010
  9. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    45,024
    16,242
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Good idea!
     
    #9 Tideland Prius, Jan 9, 2010
  10. bedrock8x

    bedrock8x Senior Member

    Joined:
    Jul 8, 2008
    1,483
    137
    0
    Location:
    California
    Vehicle:
    Other Hybrid
    It is not the two pieces of Velcro that won't hold together. It is the adhesive the Velcro sticks to the plastic panel, it will come off in few days, faster if the weather is hot.

     
    #10 bedrock8x, Jan 9, 2010
  11. pakitt

    pakitt Senior Member

    Joined:
    Aug 10, 2009
    2,173
    1,312
    0
    Location:
    Colorado
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    It's all still sticking pretty good - I will post here when it will fall down. So far so good.
     
    #11 pakitt, Jan 17, 2010
  12. Paradox

    Paradox Prius Enthusiast / Moderator
    Staff Member

    Joined:
    Sep 22, 2005
    29,110
    8,591
    201
    Location:
    USA
    Vehicle:
    2014 Prius v wagon
    Model:
    Five

    Not all adhesives are made the same. The adhesive on the back of the velcro I am talking about held and is holding well for me where I have placed it on plastic interior trim, for 3 years now. The surface must also be properly prepped before sticking it on.
     
    #12 Paradox, Jan 17, 2010
(You must log in or sign up to post here.)