1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Key fob wont work after battery replacement.

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Gaby03, Oct 24, 2021.

Tags:
  1. Gaby03

    Gaby03 Junior Member

    Joined:
    Oct 19, 2021
    30
    9
    0
    Location:
    Puerto rico
    Vehicle:
    2005 Prius
    Model:
    One
    About 2 ish weeks ago i got a 04 Prius. they key fob needed a battery replacement so i got one in AutoZone. but the car does not respond to it, it'll turn on when inserted to the ignition but the smart system does not respond to it. I made sure it was on according to the manual, I've read that key fobs need to be reprogramed when there battery's are changed. Though I'm not able to find any guide to reprogram the 04 Prius key fob to start working with the car again. The little red light also flashes when i press the lock or unlock buttons but nothing else. If anyone can help with this id be awesome!.
     
    #1 Gaby03, Oct 24, 2021
  2. alftoy

    alftoy Senior Member

    Joined:
    Mar 16, 2009
    1,132
    513
    0
    Location:
    Saskatchewan, Canada
    Vehicle:
    2008 Prius
    Model:
    Base
    Some info if you google

    2004 prius program fob
     
    #2 alftoy, Oct 25, 2021
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    the fob does not need to be reprogrammed after a battery replacement

    did the fob ever work? if not, it is the wrong fob

    you might need a new fob, a locksmith or a dealer
     
    #3 bisco, Oct 25, 2021
  4. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Did you try toggling the SKS button that lives underneath the steering column?

    FYI : your posts are moderated until you've posted 5 times.
     
    #4 SFO, Oct 25, 2021
  5. Gaby03

    Gaby03 Junior Member

    Joined:
    Oct 19, 2021
    30
    9
    0
    Location:
    Puerto rico
    Vehicle:
    2005 Prius
    Model:
    One
    The car turns on fine when inserting the fob into the keyslot thing, altough im not sure if it ever properly worked. Its the fob wth the silver toyota logo on the back wich ive read that is suposed to be the master one. But ill seek dealer assistance thanks.
     
    #5 Gaby03, Oct 26, 2021
  6. RobertK

    RobertK Member

    Joined:
    Sep 9, 2007
    128
    40
    0
    Location:
    Norfolk, VA
    Vehicle:
    2007 Prius
    Model:
    N/A
    Check the position of the smart key switch where the steering column meets the dash panel. If that doesn't fix it you might have gotten a bad fob battery from Autozone, or the fob battery might be installed backwards.

    I think that the silver logo on the key fob indicates that it is for the SKS. As far as I know there is no "master" fob. If your fob does not have a silver Toyota logo you either have the wrong fob or the fob case has been replaced.
     
    #6 RobertK, Oct 27, 2021
  7. Another

    Another Senior Member

    Joined:
    Jun 22, 2021
    1,802
    512
    0
    Location:
    Naples, Florida
    Vehicle:
    2007 Prius
    Model:
    Touring
    Is the new battery upside down? Or dead?
     
    #7 Another, Oct 28, 2021
(You must log in or sign up to post here.)