1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Key fob battery?

Discussion in 'Prius c Audio and Electronics' started by FirstName LastName, Mar 19, 2018.

  1. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Hi all, when getting a new key today, the tech said "hmmm, the button doesn't seem like it's working too good, may need a new battery". Can I pop these keys open and replace them? Doesn't need to get reprogrammed? Is it a 2032 battery? It's a 2014 C. It looks like a regular key, not a switchblade type key.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    yes, yes and no. not sure on the battery type, it is spec'd in your o/m.
    but i have to ask, if you're getting a new key, shouldn't it come with a new battery?
     
  3. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Yes! But it was the old key that came with the used car.

    Thanks!!! It does look like 2032's and I remember ordering a dozen or so from Ebay a few years ago. Should be in my freezer
     
    bisco likes this.
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,664
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Pop it open first, to verify the battery that's in there?

    I was not impressed with our 3rd gen fob btw: it'd be really nice if the battery was in an isolated compartment, not in the main zone, requiring complete opening up, exposing fragile electronics.
     
  5. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Oh yes, it is working, its the one the key guy made a copy from. So the original old one he said "hmm, seems kinda week". So I'll try putting a new 2032 in it tonight.

    Found the manual online, shows how to open the key, and then remove the module, and then open that up.
     
    Mendel Leisk and bisco like this.
  6. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Welp, that didn't work. Just opened it up and saw a 2016 battery in it. I thought maybe that was wrong but I opened the manual.pdf and it said "keys without smart key system uses 2016 and keys with smart key system uses 2032's. So off tomorrow to get a 2016
     
    bisco likes this.
  7. DKTVAV

    DKTVAV Active Member

    Joined:
    Jun 3, 2012
    510
    101
    0
    Vehicle:
    2012 Prius c
    Model:
    Four
    I made the same mistake in the opposite way for my Smart Key:(
     
  8. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Got a new multimeter and battery was reading like 2.5 so I replaced it. Reading 2.9. So all good for a while.
     
    Mendel Leisk likes this.
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    ouch, i just put a new duracell in, 3.06v
     
  10. FirstName LastName

    FirstName LastName Junior Member

    Joined:
    Mar 4, 2018
    32
    12
    0
    Location:
    SoCal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    That's good. I should check it again. I just got this brand new multimeter so maybe I was holding it funny. I'll try with the other one that's in the package. It should be reading at least 3.0 right?