1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Just a simple question about o2 sensors

Discussion in 'Gen 3 Prius Main Forum' started by abdullah arslan, Sep 6, 2024.

  1. abdullah arslan

    abdullah arslan Member

    Joined:
    Nov 19, 2019
    181
    77
    0
    Location:
    46628
    Vehicle:
    2010 Prius
    Model:
    V
    I ve also Rav4 other than prius and it threw the code po420. I think due to first o2 sensor not working. I assume the first graph supposed to be up-downs after quick research. Am I right? Screenshot_20240906_185659_Gallery.jpeg

    Posted via the PriusChat mobile app.
     
    #1 abdullah arslan, Sep 6, 2024
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,361
    1,790
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    That code is for the catalyst being below the threshold of performance according to its internal test that it runs every so often If the O2 sensor downstream was bad I think there is a separate code for that so there's always that we may be able to check the O2 sensor with just a regular DVOM ohm meter etc. once the catalyst can't pass the test that the car runs this is the code you get I do believe there are codes for the O2 sensor upstream and downstream that are different
     
    #2 Tombukt2, Sep 6, 2024
(You must log in or sign up to post here.)