1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How do the tire air valves affect the inflation pressure alarm?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by domtick, Sep 16, 2015.

  1. domtick

    domtick Junior Member

    Joined:
    Jun 29, 2011
    4
    0
    0
    Location:
    Middletown. Delaware
    Vehicle:
    2009 Prius
    Model:
    N/A
    Just had new tire installed and now noticing that the original stem cap was not used. Alarm is not lit, but wondering if I should try to retrieve the original one, since we notified the tire shop that afternoon.
    .....or purchase a new one.
     
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,674
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Are they green caps, from Costco?

    My rule #1 when going in there: take the valve caps off beforehand.

    But anyway, any half-decent cap will be effective. They're mainly to keep the valve clean. And provide a slight second-line-of-defence against air leakage, I suppose.
     
  3. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,920
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The valve caps have nothing to do with the TPMS warning system. If your original caps were metal and now they are plastic, that's a downgrade. But plastic for plastic, probably not worth worrying about.
     
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,674
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    OEM are very flat-topped, metallic looking, but actually plastic. I read somewhere metal caps are bad for something, causing valve stems to rust, or?
     
  5. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,920
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The metal ones I've had were aluminum, so no worries about rust.
     
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,674
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Not really up on it, but reading a bit, see some talk about dissimilar metals. If you frequently take them off to check pressures (always a good idea) then not time for anything to seize I guess. But hey, think I'll stick with plastic.