1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Hill Assist; Question

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by hsnmz, Oct 14, 2013.

  1. hsnmz

    hsnmz Junior Member

    Joined:
    Jan 28, 2013
    74
    5
    0
    Location:
    Pakistan
    Vehicle:
    2008 Prius
    Model:
    N/A
    A friend of mine has recently (4 days ago) got a 2010 Prius III. On saturday while stoping at a red light the hill assist got activated, maybe he depressed the brake pedal too hard. Now the problem is that the hill assist is permanently active in his car i.e the hill assist icon stays there whenever he turns his car on. He has tried to repeat the hard press brake pedal process but to no avail. So need help how to deactivate it.
     
    #1 hsnmz, Oct 14, 2013
  2. jdk2

    jdk2 Active Member

    Joined:
    Mar 6, 2010
    751
    219
    0
    Location:
    Raleigh, NC
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Advanced
    The icon on the dash is the Traction Control/VSC and is possibly indicating a malfunction in that system. The hill assist will cause the light to flash. If it's on steadily, there's a problem.
     
    #2 jdk2, Oct 14, 2013
  3. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    The hill assist automatically deactivates in few seconds after releasing the brake pedal. So if the light hasn't gone out, as the previous reply indicated, there is some sort of problem.
     
    #3 fuzzy1, Oct 14, 2013
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    dealer.
     
    #4 bisco, Oct 14, 2013
    ou812 likes this.
  5. hsnmz

    hsnmz Junior Member

    Joined:
    Jan 28, 2013
    74
    5
    0
    Location:
    Pakistan
    Vehicle:
    2008 Prius
    Model:
    N/A
    Where is this vsc sensor located. How about reseting the ecu, just for a try. I read somewhere that ecu can be reset by removing the battery terminal but don't know which terminal to remove and for how long ?
     
    #5 hsnmz, Oct 16, 2013
  6. El Dobro

    El Dobro A Member

    Joined:
    Jul 12, 2011
    7,027
    3,241
    1
    Location:
    NJ
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    You may want to check for codes before you disconnect the battery.
     
    #6 El Dobro, Oct 16, 2013
(You must log in or sign up to post here.)