1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help! Trying hard to remove the rear left/right side wing..

Discussion in 'Gen 3 Prius Accessories and Modifications' started by us_matrix, Apr 27, 2011.

  1. us_matrix

    us_matrix Member

    Joined:
    Dec 28, 2010
    110
    10
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    II


    I was having hard time to remove the rear seat left/right side wing. I tried but no success and did not want to damge what behind. Anyone got the instruction of how to remove it?

    Thanks.
     

    Attached Files:

  2. CivicSky

    CivicSky Member

    Joined:
    Jun 4, 2010
    163
    71
    0
    Location:
    San Deigo
    Vehicle:
    2010 Prius
    Model:
    II
    I removed the B-pillar seat belt cover, I pulled down the weather seal around the front door frame first. Maybe you can try to do the same on the rear door frame started from the B-pillar edge.
    [​IMG]
     
  3. longhaul

    longhaul Junior Member

    Joined:
    Jul 29, 2009
    25
    0
    0
    Location:
    montgomery, il
    Vehicle:
    2010 Prius
    Model:
    II
    .
     
  4. longhaul

    longhaul Junior Member

    Joined:
    Jul 29, 2009
    25
    0
    0
    Location:
    montgomery, il
    Vehicle:
    2010 Prius
    Model:
    II
    Get a good grip on the bottom of the wing & slide it up. There are two clips built into the back of the wing one on top part & one on the bottom of part & they slide into part of the rear seat framing. Hope this helps. Longhaul
     
  5. EthanC

    EthanC Junior Member

    Joined:
    Apr 18, 2011
    17
    1
    0
    Location:
    SF bay
    Vehicle:
    2010 Prius
    Model:
    V
    Beside all the above, my V has a screw in the bottom of that piece. Yo need to remove that first.
     
  6. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    760
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    Remove the plastic piece on the carpet by the rear door. Push down the rear seat cushion by the "wings" there's a bolt I believe 10mm or 12mm that hold the "winds" down that you have to remove. Once removed, pull out the weather stripping like in CivicSky's pict, slide the "wings" straight up.