1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help putting hold release mechanism back in

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by proteusmd1, Mar 11, 2019.

  1. proteusmd1

    proteusmd1 Junior Member

    Joined:
    May 31, 2018
    6
    0
    0
    Location:
    Los Angeles
    Vehicle:
    2007 Prius
    Model:
    Three
    My daughter adn I put a stereo in her 2009 Prius and somehow the hood release came apart. I have both plastic pieces and the spring but for the life of me can't figure out how it goes back in. Anyone?
     
    #1 proteusmd1, Mar 11, 2019
  2. cyberpriusII

    cyberpriusII Prodigyplace says I'm Super Kris

    Joined:
    Oct 1, 2009
    1,139
    1,612
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    N/A
    I took off that lower panel some four or five years ago,,,,,

    IIRC, had to be careful NOT to break the hood release setup.

    Someone else may offer better advice, but I would think you will have to remove the panel to see just what you need to "fix."

    Or not -- hard to tell from your description -- would photos from your end help.

    So, again, not sure it would be helpful, but to take off the panel....

    Take off the vent to the left of the steering wheel by pulling straight out and take out the two Phillips head screws on the lower panel.

    Carefully remove the lower panel -- you will have to unplug some wire harnesses IIRC -- so keep track of what you unplug and how to replug.

    That may reveal what needs attention.
    kris
     
    #2 cyberpriusII, Mar 11, 2019
    bisco likes this.
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,261
    50,100
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    techinfo.toyota.com
     
    #3 bisco, Mar 11, 2019
(You must log in or sign up to post here.)