H11 Xenon Light kit install question

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Christian_cool, May 14, 2016.

  1. Christian_cool

    Christian_cool Junior Member

    Joined:
    Jun 7, 2014
    92
    17
    0
    Location:
    Germany
    Vehicle:
    2010 Prius
    Model:
    III
    Hey Prius friends

    I have recently received new Xenon light kit for my 6 year old 2010 Prius..After changing the normal halogen bulb a million times.. so I hope for better results. I already tested one of them and I am surprised by it's brightness!

    1463210597961.jpg My question is how is best to wire the Xendrive can bus to the car I mean (12V) power supply. Shall I just connect it with a converter plug to the cars original headlight plug or fuse box, what is best suitable for the cars electronic?

    And where is best to mound the Xendrive Can Bus? I read they become really hot under long operations.

    Here are some details for each,canbus:
    Phillips XLD CK G4
    V(in): 9-16V (13,2V normal)
    Lin: 3,4A normal (10A Max)
    P(out): 35 W
    V(start): 23KV Max.

    I posted a pic of the kit I ordered.

    Any help and suggestions would be appreciatet and if my English is bad sorry for that :)

    Posted via the PriusChat mobile app.
     
    #1 Christian_cool, May 14, 2016
  2. Friend of Bill W.

    Friend of Bill W. Member

    Joined:
    Apr 23, 2016
    109
    164
    0
    Location:
    Elkhart, IN
    Vehicle:
    2013 Prius
    Model:
    Two
    I have a similar kit made by Kensun. I just did the plug and play and they work fine, but mine didn't have bare wires like yours, mine is all one harness then plugs right into where the stock bulb would.

    Posted via the PriusChat mobile app.
     
    #2 Friend of Bill W., May 27, 2016
(You must log in or sign up to post here.)