1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen 2: List of recommended related parts to replace when (using OEM) replacing HV battery

Discussion in 'Gen 2 Prius Main Forum' started by Priusjames, Aug 22, 2021.

Tags:
  1. Priusjames

    Priusjames Member

    Joined:
    Jul 23, 2004
    91
    67
    0
    Location:
    Irvine, CA
    Vehicle:
    2006 Prius
    Model:
    N/A
    I’m going to do the OEM hybrid/traction battery rebuild. I looked, but didn’t see any posts cleanly listing the parts related to replacing/rebuilding the battery w OEM battery.

    Q: What parts did you see as you went along that you wished you had ordered before you were in the middle of the job?

    I know there’s stuff that needs to be moved from the old battery to the new and a core returned, but not what stuff that is/isn’t.

    I’ll go to YouTube and start watching videos, of course, but know this community will have some smart insights. TIA!​
     
    #1 Priusjames, Aug 22, 2021
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    #2 bisco, Aug 22, 2021
    SFO and Priusjames like this.
  3. Priusjames

    Priusjames Member

    Joined:
    Jul 23, 2004
    91
    67
    0
    Location:
    Irvine, CA
    Vehicle:
    2006 Prius
    Model:
    N/A
    That's the thread I was looking for! It's not really chock full of the information I hoped for, but has some tidbits for sure.

    I'm kind of surprised I can't find videos here or on youtube other than "unbolt the old one and put in a remanufactured entire unit from somebody else," also addressed in the thread.

    Thanks
    -J
     
    #3 Priusjames, Aug 22, 2021
    Last edited: Aug 22, 2021
  4. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    If you're doing the OEM battery replacement, one of your concerns will be the battery ecu. Your new OEM battery will have a new "wire frame #2", but frequently the ecu has significant corrosion on the socket pins where the WF#2 is inserted.

    Also give the cooling fan a good cleaning while you're in there.

    You'll also see a set of wires near the cooling fan bracket with a plug and socket. That plug and socket often develops corrosion on two of the pins and is typically very obvious. Now would be a good time to just cut the wires on each side of the plugs and splice them together. I've done it on all my Gen 2s and many customers.
     
    #4 TMR-JWAP, Aug 22, 2021
    Priusjames likes this.
  5. Priusjames

    Priusjames Member

    Joined:
    Jul 23, 2004
    91
    67
    0
    Location:
    Irvine, CA
    Vehicle:
    2006 Prius
    Model:
    N/A
    Perfectly the kind of hints that help, thanks! I've done the fan cleaning before but didn't know about the other hints,

    I guess I'm the next person telling myself I'll make a video of the process when I do it now, heh. I'll make sure to cover any hints/tips I get in this thread when I do it in my mind. Thanks again.
     
    #5 Priusjames, Aug 22, 2021
    SFO and bisco like this.
  6. PriusZombie

    PriusZombie New Member

    Joined:
    Aug 27, 2021
    4
    0
    0
    Location:
    Orange County, California
    Vehicle:
    2006 Prius
    Model:
    Plug-in Advanced
    I am getting a new battery!
     
    #6 PriusZombie, Aug 27, 2021
  7. rogerthat

    rogerthat Active Member

    Joined:
    Sep 19, 2015
    363
    119
    0
    Location:
    Georgia
    Vehicle:
    2009 Prius
    Model:
    N/A
    Can someone confirm that new oem batteries come without the two rubber vent tubes?
     
    #7 rogerthat, Nov 26, 2021
  8. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,855
    3,967
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Yes confirmed, they do not come with new vent tubes. You reuse the old ones.

    If they are smelly, you can fashion replacements from some silicon tubing. I think some people might even leave them off entirely if they were smelly, gooey or otherwise objectionable.
     
    #8 dolj, Nov 26, 2021
  9. rogerthat

    rogerthat Active Member

    Joined:
    Sep 19, 2015
    363
    119
    0
    Location:
    Georgia
    Vehicle:
    2009 Prius
    Model:
    N/A
    Thanks. I notice you are in New Zealand... assuming this will be the case in the US too. I'm very familiar with the smelly vent tubing issue - I replaced mine with silicone tubing shortly after I bought my car.
     
    #9 rogerthat, Nov 26, 2021
    dolj likes this.
  10. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,855
    3,967
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    As far as I am aware the back end is identical.
    Nice.
     
    #10 dolj, Nov 27, 2021
(You must log in or sign up to post here.)