1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Fuel injectors leak, help?

Discussion in 'Gen 2 Prius Main Forum' started by Mil-town Prius, Jun 17, 2011.

  1. Mil-town Prius

    Mil-town Prius Junior Member

    Joined:
    Jun 17, 2011
    11
    0
    0
    Location:
    milwaukee
    Vehicle:
    2005 Prius
    Model:
    II
    Hey guys,

    Im a longtime lurker, my prius is almost mint...with 226k on it.

    I just recently got a code from it P0302, so I thought I'd check
    the fuel injectors, I took them out and cannot reinstall them
    with out them leaking all over....i removed and replaced new orings on the top and cranked down the bolts really hard...and still a bunch
    leaking...is there a trick I should know about?

    Please help guys!:(
     
    #1 Mil-town Prius, Jun 17, 2011
  2. dogfriend

    dogfriend Human - Animal Hybrid

    Joined:
    Feb 26, 2007
    7,512
    1,188
    0
    Location:
    Carmichael, CA
    Vehicle:
    2007 Prius
    IIRC, you should lube the o-rings lightly before installing them. Maybe you are damaging the o-ring during installation? Also, don't crank down the bolts as hard as you can - you should use a torque wrench to tighten them to spec. The bolts holding the fuel delivery pipe (aka fuel rail) are supposed to be torqued at 14 ft-lb.

    [​IMG]
     

    Attached Files:

    #2 dogfriend, Jun 17, 2011
    1 person likes this.
  3. seilerts

    seilerts Battery Curmudgeon

    Joined:
    Mar 7, 2010
    3,326
    1,513
    38
    Location:
    Santa Fe, NM
    Vehicle:
    2005 Prius
    I have attached a snippet from the service manual.

    I hope you changed spark plugs and swapped igniters first to rule them out?
     

    Attached Files:

    #3 seilerts, Jun 17, 2011
    2 people like this.
  4. Mil-town Prius

    Mil-town Prius Junior Member

    Joined:
    Jun 17, 2011
    11
    0
    0
    Location:
    milwaukee
    Vehicle:
    2005 Prius
    Model:
    II
    I think I got it guys. I just started it up with the air filter box off and saw that
    injector 2 was spraying like crazy so I changed that oring again it was kinda mangled,
    even though it was brand new. So far so good....just erased codes....and will drive and see what happens! Thanks again dogfriend and seilerts!
     
    #4 Mil-town Prius, Jun 18, 2011
(You must log in or sign up to post here.)