Enginer Plan B

I still have great confidence that whatever Jack is doing in China will remedy the current Enginer's short comings. As any Enginer owners know by now that the current kits with realforce batteries and BMS16D have problems with the BMS shortening the usable capacity and in some cases, prematurely failing cells which in turn, making the whole battery packs failing. Among other things, component failures is giving Enginer a bad reputation. Further more, because Jack is meeting the new suppliers and monitoring productions in China, almost all communications with Enginer regarding warranty matters have been ceased. There's panic brewing among owners that what if Enginer's in financial trouble dues to many warranty problems.

The purpose of this thread is to cover the worst case scenario. What if Enginer has pulled its plugs. I didn't want to post this in the Enginer forum and start a panic amongst the owners. Many Enginer forum members have access to PC so they can be directed here.

Enginer's system is pretty basic. The system is based on
- 48v 80Ah 16S LiFePo4 battery pack
- A BMS to monitor the charging, discharging and balancing of the pack. Due to the nature of the LiFePo4 chemistry, it operates at its optimum level if it's balanced amongst all the cells.
- A 900w 48v 15 amp LiFePo4 charger
- The heart of the system is the 48V to 240V DC to DC converter.
- Other minor components are a 48v resettable circuit breaker, 2X 48v cooling fans, 4AWG power wires with Anderson quick disconnect plugs and a nickle plated steal enclosure with a stainless steel lid.

The main components are the ones us owners worry about failing. There are a few owners that have taken matters into their own hands to remedy the failing components problems. I want this thread to be the information central for the out of warranty Enginer kits. In this thread you will find places to purchase components similar to the ones used in the Enginer kits and places that repair Enginer components.

If you have any information regarding outside repairs, suppliers of components used in Enginer kits, I ask that you kindly share with us what you know and what you've found on the internet. Thank you


I'll start with what I've found
Battery
RFE-48V 80AH lithium battery for EV - Detailed info for RFE-48V 80AH lithium battery for EV,lithium ion battery for EV,RFE-48V 80AH lithium battery for EV,RFE-16F80 on Alibaba.com Updated July 12th, 2011

RFE-48V 80AH lithium battery for EV - Detailed info for RFE-48V 80AH lithium battery for EV,lithium ion battery for EV,RFE-48V 80AH lithium battery for EV,RFE-48V80AH on Alibaba.com Updated July 12th, 2011

48V 80Ah

48V 80Ah

prismatic cells - RFE (China Manufacturer) - Battery, Storage Battery & Charger - Electronics & Electricity Products - DIYTrade China individual cells
You may also contact Wendy Peng at [email protected]


Charger
http://www.ebike-bmsbattery.com/
900W LiFePo4 Charger
They are in China. I can't locate any US based dealer. Also note that the Enginer BMS can accept up to 25amps for charge current. That's 1500w. That's about the top limit for level 1 charger. If you want a fast charging system at home, you can extend the 48v charger wires from the kit to the outside of the vehicle with Anderson plugs and plug in the Andersons instead of the NEMA15 plug. Be aware that the BMS must be able to turn off the external charger once HVC occurs.

Added on June 13th, 2011
DC Power Supply - Switching Power Supply - Mastech Power Supply HY6020EX 60V 20A Over Voltage Over Current Protection (Powered by CubeCart)
DC Power Supply - Switching Power Supply - Mastech Power Supply HY7530EX 75V 30A Over Voltage Over Current Protection 110V Input (Powered by CubeCart)
DC Power Supply - Switching Power Supply - Mastech Power Supply HY7530EX 75V 30A Over Voltage Over Current Protection 220V Input (Powered by CubeCart)
These power supplies will charge faster than the Enginer charger. The HY7530EX is borderline level 2 charger. Since these power supply are fully adjustable, they can charge any type of batteries including LiFePo4.
HVC for these power supplies must isolate the output on the safe side, not just cutting power to the power supply..

----------------------------------------------------------------------------

BMS
MiniBMS 16 cell Master Board - CleanPowerAuto LLC - Not a direct replacement but others have made it work withe Enginer kit.
Added on May 11th, 2011 - Pacific EV has a direct replacement BMS for the Enginer BMS16D. You can contact Cory at [email protected] More information on post # 66

Added on July 12th, 2011 - JST-HX 8S M-F extensions needed for wiring up the MiniBMS ProgressiveRC - Balance Lead Extensions

----------------------------------------------------------------------------

DC-DC converter
Added on August 5th, 2011
Finally a source for a 48v to 240v converter thanks to lopezjm2001 Details at http://priuschat.com/forums/prius-phev-plug-in-modifications/92414-enginer-plan-b-3.html#post1361069
Contact Mr.Fang at Shanghai Fountainhead Electronics Co.,Ltd http://www.21ftd.com/ to purchase the converter.
A word of caution. Fountainhead Electronics was the ODM for Enginer's older kits. Enginer has since switched to another supplier probably because of poor QC. Fountainhead Electronics continues to manufacture replicas PHEVs based on Enginer's design. They do sell all the components necessary to assemble a complete kit. Fountainhead Electronics is another but not recommended alternative to purchase all the parts necessary to get your Enginer kit up and running.

----------------------------------------------------------------------------

Added on June 13th, 2011
Top balancing
If you're using alternative BMS that utilize top balancing, you can use Mastech adjustable power supply to top balance your battery pack.
The power supply that I'm using is DC Power Supply - Linear Power Supply - MASTECH VARIABLE REGULATED LINEAR DC POWER SUPPLY 60V 3A HY6003D (Powered by CubeCart)
First, start with manually balance the pack by draining the high cells. You can do this with a 10watt 1to10ohm cement resister. It is possible to drain up to 3 cells at once using 1 resister as long as you don't exceed the balance wires' current capacity (9pin balance wires). They must be cells next to eachother. If you need to drain C1 and C3, you have drain each separately or else you will drain C2 as well. Each cell is drain at the same current regardless of draining 1 cell at a time or 3 cells. For example, drain 1 cell at .6 amps, drain 2 cells at 1.2 amps, drain 3 cells at 1.8 amps. If you have 2 low cells you can charge them up with the Mastech power supply instead of spending days to drain 14 cells.
Once you've balanced the pack to accept 4+KW, you can further top balance by using the Mastech variable power supply. You can set the voltage to 55V constant voltage and work your way up. Due to the battery being a load, the voltage drop will match the battery pack's voltage. Depending on the shunting capacity of your BMS, you can set the current to match the BMS's shunting current. Any high cells will have its charge current shunted by the BMS. Any low cells, will accept the charge without shunting. As each cells are being charged and balanced, the charge current will decrease.
Once fully balanced, a healthy 4KW RFE pack can accept 5KW +/- 0.2kw on the kill-a-watt meter using the Enginer charger.

 

I didn't list the fans inside the converter and the charger because they are part of the converter and the charger so they don't count as independent fans.

 

Hi Dan, most of the problems discussed in the Enginer forum are from people with RealForce battery packs. The battery packs and the charger I've found are direct replacement. The only one that's not a direct replacement is the BMS and have noted that in the BMS information. Older models use either Mottcell or Thundersky cells. Those are easier to find than the preassembled RealForce packs. Since my kit uses the RF packs, I can't comment on the kits that uses Mottcell or Thundersky cells.

SFG, high power chargers do come with cooling fans. Any chargers without fans, are not going to powerful enough to charge 4kw in a timely matter. The original Enginer charger is 900w. Any LiFePo4 charger greater than 900w will have built in fans. The only charger I've found that doesn't have a fan is the ElCon 1500w charger. It has big nice person heatsinks and will not fit in the enclosure. I can't comment on the DC converter cause I have not found any aftermarket replacements.

 

5kw inverter for $200 is possible but it's 12v input. 5kw inverter with 48v input are usually found in industrial UPS. Not sure if you can find one for $200 though. using high current high voltage diode would turn the AC current into rippled DC current. Will a high voltage, multi-farad capacitor filter the rippled DC voltage to true DC voltage?

 

I think I'm going to get the miniBMS with my tax return. I'll install the MiniBMS and send my 16D in to get the 3.2 firmware. This 20 mile range is ridiculous. It took me over a month and a half to burn a tank of gas. How well does it balance the battery pack? Does it operate the same as the BMS16D when it charges and toggle on and off to keep the pack fully charged? How many charges does it take to let the pack top balanced?