1. Attachments are working again! Check out this thread for more details and to report any other bugs.

DIY Ramp

Discussion in 'Prius v Accessories and Modifications' started by syscon, Jun 4, 2013.

  1. syscon

    syscon Member

    Joined:
    Jan 14, 2012
    329
    42
    0
    Location:
    Edm. Alberta
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    I was thinking of making ramp like on the link enclose, to have more room to work underneath.
    Corvette C3 Ramps - Build Home Made Car Ramps
    The plastic ramp are too low, I think they are 6in. I have a metal ramp 8in but it is hard to drive on to it.
    It slides on a concrete and I need to put extra pieces of wood 2x4 as there is not enough clearance in the front. Not to mention the car is not level.
     
    #1 syscon, Jun 4, 2013
    dustoff003 and 13PV like this.
  2. p00kienrayray

    p00kienrayray Active Member

    Joined:
    Mar 14, 2012
    720
    135
    0
    Location:
    Long Beach, CA
    Vehicle:
    2013 Prius
    Model:
    Three
    The light bulbs/switch installed into the ramp with the 300ZX on it is genius.
     
    #2 p00kienrayray, Jun 4, 2013
  3. syscon

    syscon Member

    Joined:
    Jan 14, 2012
    329
    42
    0
    Location:
    Edm. Alberta
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    #3 syscon, Jun 4, 2013
  4. p00kienrayray

    p00kienrayray Active Member

    Joined:
    Mar 14, 2012
    720
    135
    0
    Location:
    Long Beach, CA
    Vehicle:
    2013 Prius
    Model:
    Three
    Agreed. The ramp is long, but narrow. Definitely would feel more comfortable with a friend guiding.
     
    #4 p00kienrayray, Jun 4, 2013
  5. Perkins Family

    Perkins Family New Member

    Joined:
    Jun 1, 2013
    9
    6
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Holy smokes, this is absolutely amazing and I don't know why this hasn't gone viral yet thank you very much for posting as I will be getting started on a set up similar to the 300z's two weekends from now, although I have read that they are sturdy but I'm wondering how durable they are and how many times they can be used until they have to be scraped and I'd be building another set.
     
    #5 Perkins Family, Jun 9, 2013
  6. lachrisb

    lachrisb Junior Member

    Joined:
    Aug 13, 2012
    35
    19
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius c
    Model:
    Four
    I wonder if one could sink the surface the car drives on and make a lip of sorts to guide the wheels so you wouldn't drive off... These look amazing!!
     
    #6 lachrisb, Jun 9, 2013
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    The idea of DIY ramps gets into my head every so often. Then I give myself a smack and get back to floor jack and safety stands. ;)
     
    #7 Mendel Leisk, Jun 9, 2013
  8. syscon

    syscon Member

    Joined:
    Jan 14, 2012
    329
    42
    0
    Location:
    Edm. Alberta
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    If you keep them in a garage in dry condition and they are done correctly they will most likely outlast your car.
    My main concern is the ability to drive OFF from the ramp. It might be easy to drive up but getting the car down might be tricky; slight movement of the steering wheel and the car might be off the ramp :-/

    In addition the incline must be done with correct angle as our clearance is only 6.5in distance between wheels about 110in
    Anybody good with numbers?
     
    #8 syscon, Jun 9, 2013
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i like his air meter.(y)
     
    #9 bisco, Jun 9, 2013
  10. fokker

    fokker New Member

    Joined:
    Jun 13, 2013
    1
    0
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Hello all,
    while searching for an older post in a different forum, I stumbled across this one discussing ramps and thought I may be able to help out. I am the one who built the ramps with the 300zx on them, and I am more than happy to share insight/construction details with anyone who is thinking of building a set :)
    First off, to address some of the questions/concerns above: yes, you should DEFINITELY have a friend to help quide you onto the ramps. Yes, the ramps are VERY strong and will likely outlive yourself if you take care of them (I.E. painted/stained, and covered storage), and I would be happy to describe my (admittedly crude) strength test to anyone interested. Yes, the ramps are easy to drive on and off with even the lowest car; that 300zx you see in the pictures has a front lip that is only about 4 inches off the ground, and I drive on with ease. If they are built properly, driving off and on is so buttery smooth the experience will make you smile.
    In all honesty, if you are any type of car person, you will not regret building a set of these ramps. I really, really, wish I had built a set 20 years ago when I first started monkey-wrenching; it would have saved me countless discomforts, strains, and curses (to say nothing of time!).
     
    #10 fokker, Jun 13, 2013
  11. walterm

    walterm Active Member

    Joined:
    May 17, 2007
    466
    202
    34
    Location:
    NJ
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    I checked their supplier website, they do not ship to the US or Canada:(. It's too bad, I liked them and was thinking about getting a pair.
     
    #11 walterm, Jun 14, 2013
(You must log in or sign up to post here.)