1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Direct wiring for DashCam / other devices

Discussion in 'Gen 3 Prius Technical Discussion' started by fiz, May 26, 2024.

  1. fiz

    fiz New Member

    Joined:
    Apr 4, 2024
    9
    2
    0
    Location:
    London, UK
    Vehicle:
    2011 Prius
    Model:
    Three
    In my old Citreon car I was able to take connection from a fuseboard near Passenger side for DashCam etc. There were wiring diagram and videos for such connections.

    For Prius 3rd gen, I am not having much luck finding the information. Can you point me to the appropriate content please?
     
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,369
    1,791
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    There's a fuse box right in about the same location just above your left knee and a left hand drive car is a fuse box that you could find plenty of wiring to wire whatever it is your wiring.
     
  3. fiz

    fiz New Member

    Joined:
    Apr 4, 2024
    9
    2
    0
    Location:
    London, UK
    Vehicle:
    2011 Prius
    Model:
    Three
    #3 fiz, May 26, 2024
    Last edited: May 26, 2024
  4. amarino

    amarino Member

    Joined:
    Mar 13, 2018
    128
    95
    99
    Location:
    California
    Vehicle:
    2015 Prius
    Model:
    Two
    You can use a multimeter to check voltage when the car is off (fuse is always powered) and only powered when ignition is on.

    For ground I just used a random bolt that goes into the metal body in that footwell area and have had no issues so far. Just make sure it is out of where your feet will be so you don't accidently rub or wear down the wire.

    I shared some pictures and details of my dashcam install here: Vantrue N4 Pro dash cam hardwire front and rear | PriusChat