1. Attachments are working again! Check out this thread for more details and to report any other bugs.

DASH BOARD LIGHTS ON

Discussion in 'Gen 3 Prius Technical Discussion' started by JR GILL, Mar 23, 2022.

Tags:
  1. JR GILL

    JR GILL New Member

    Joined:
    Mar 23, 2022
    6
    1
    0
    Location:
    RIVERSIDE CALIFORNIA
    Vehicle:
    2010 Prius
    Model:
    III
    Hello guys,
    My Prius 2010 has been sending some weird light warning:
    - Bake system warning light (yellow and red)
    - ABS (antilock brake system warning light)
    - Antiskid (stability control)


    It all appears at the same time and while on, I can still drive the car but the brake is not usual, like stiff.
    They were gone after i changed 12v battery but came back on after 3 days
     
    #1 JR GILL, Mar 23, 2022
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome!
    when you get trouble lights, they are telling you there is a problem. to find the problem, you have to read the trouble codes by hooking up a scanner to the obd port under the dash. dealers and hybrid mechs have them, or if you want to diy, there are several good ones available and you can find threads on them here.
     
    #2 bisco, Mar 24, 2022
  3. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Like @bisco said, you will need to read the codes with a Prius compatible code reader. There are several possible causes, some of which are cheap and simple and some of which are expensive. Guessing gets VERY expensive.
     
    #3 jerrymildred, Mar 24, 2022
  4. JR GILL

    JR GILL New Member

    Joined:
    Mar 23, 2022
    6
    1
    0
    Location:
    RIVERSIDE CALIFORNIA
    Vehicle:
    2010 Prius
    Model:
    III
    i did hook up obd scanner but it says no code .
     
    #4 JR GILL, Mar 24, 2022
    bisco likes this.
  5. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Then you must have used one that doesn't talk to all the computers in a Prius. If there are warning lights, there are codes because it's the codes that turn on those lights.
     
    #5 jerrymildred, Mar 25, 2022
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    tech stream is the gold standard
     
    #6 bisco, Mar 25, 2022
(You must log in or sign up to post here.)