Custom LED foglights for my prius C trim 2.

I decided to create LED foglights for my prius C trim level 2 using the preexisting foglight covers. I used high brightness (130 lumen * 6) amber luxeon rebel LEDs with 12 degree collimators. I used the built in wiring harness, fuse, and relay. I made the aim adjustable, so that way I can optimize my light output and minimize glare.
I have the blinkers disable them, for an added effect and potential increase in visibility.
It was a very time consuming project, but I'm very happy with the results. I already have 6000k morimoto HID's for the low beams, and cheap led bulbs elsewhere.

I wrote up a little webpage with pictures/video and a partial how-to:
Custom Prius C Foglights (pictures, and instructions)

 

Hey there.

At least with 2012, 2013 models the wiring was there. I assume it is all the same today, but it should be verified.
If you have the fog lights, they pop in and connect very easily, I took the unusually difficult step of building my own fog lights with the blank panel using primitive tools.
The hardest part (shown in my little write up) is removing/ reworking the relay box to connect a missing pin.

The indicator in the dash doesn't illuminate, but only because it isn't wired up in that trim. This is similar to the issue I had with the relay box/ computer I had to modify. I actually think the led exists in the display panel. I didn't want to tear apart the whole dash, to get to dash indicator wiring. With sufficient motivation and the instructions to disassemble the dash, I'm pretty sure I could make it work.