1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cold weather: Car won't go into drive or reverse

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by trillium, Dec 1, 2006.

  1. trillium

    trillium New Member

    Joined:
    Jun 23, 2006
    19
    0
    0
    We had some sub-freezing weather last night and this morning my '06 Prius, purchased in July, was not functioning properly.

    If I press the Start button, nothing happens.

    If I press it again, the car starts normally, except that I can't put it into drive or reverse (goes into Neutral instead).

    Also the check engine light, brake light, and skid light are on.

    This happened the first time I tried to start it. The second time, it worked normally, with no warning lights on. Then it malfunctioned again on the third, fourth, fifth, and sixth tries. That was several hours ago and I called for it to be towed.

    Now I've just checked it again (weather has warmed up significantly) and suddenly everything is ok again (started properly four times in a row).

    Any ideas what is going on?
     
    #1 trillium, Dec 1, 2006
  2. eagle33199

    eagle33199 Platinum Member

    Joined:
    Mar 2, 2006
    5,122
    268
    0
    Location:
    Minnesota
    Vehicle:
    2015 Prius v wagon
    Model:
    Two
    did you have your foot on the brake when trying to start it? it sounds to me like the first two times you hit the button you were cycling through the ACC modes, and then the second time you tried to start it your foot was on the brake, then everything after that your foot was off the brake.

    It's rather easy, if you think something is wrong with the car, to forget to put the brake on (equally as easy to forget about the brake all together when it's cold and you just want to get the air on).

    Go out to the car, intentionally leave your foot off the brake and press the button, see if thats the same result you were getting earlier. Then press the brake, and it should start up like normal.
     
    #2 eagle33199, Dec 1, 2006
  3. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    466
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    did the ready light come on at all? did the relays in the back click?
     
    #3 galaxee, Dec 1, 2006
  4. richard schumacher

    richard schumacher shortbus driver

    Joined:
    Mar 27, 2004
    7,663
    1,041
    0
    Location:
    United States
    Vehicle:
    2004 Prius
    Model:
    N/A
    If you *are* pressing the brake good n' hard, then perhaps the brake position sensor is faulty.
     
    #4 richard schumacher, Dec 2, 2006
(You must log in or sign up to post here.)