1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Clock spring replaced, now traction control light always on

Discussion in 'Prius v Main Forum' started by gmyatko, Nov 4, 2024 at 6:26 AM.

  1. gmyatko

    gmyatko Junior Member

    Joined:
    Sep 3, 2023
    4
    3
    0
    Location:
    Palm Bay, Fl.
    Vehicle:
    2014 Prius v wagon
    Model:
    III
    Npw that I replaced my clockspring, the traction control light is lit all of a sudden. What would my clockspring have to do with that? There's no traction control on/ off anywhere?
    Also, all this was for a horn staying on. horn still stays on. All for naught. Real root cause is replacing plastic isolators for actual horn switch itself. there's been so many of us that didn't know about these little white isolators.
    Now I need to find a diagram
     
    #1 gmyatko, Nov 4, 2024 at 6:26 AM
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,874
    16,191
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    There's a steering angle sensor used by the traction control, attached to the clock spring.

    As usual when a warning light is on, you can retrieve the trouble codes (for traction control codes, you can use this method if you don't have a suitable scan tool: Blink (a/k/a Flash) Codes – How to. | PriusChat).

    Looking the code(s) up in the repair manual, you see just what the car is telling you about, and how to troubleshoot and resolve it.

    Toyota Service Information and Where To Find It | PriusChat
     
    #2 ChapmanF, Nov 4, 2024 at 12:25 PM
(You must log in or sign up to post here.)