1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Check Engine Light Just Came On

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by TSW, Nov 23, 2016.

  1. TSW

    TSW New Member

    Joined:
    Nov 23, 2016
    4
    0
    0
    Location:
    US
    Vehicle:
    2012 Prius c
    Model:
    Four
    I have a 2013 Prius C4 and my Check Engine light just came on. It's Thanksgiving Eve and I'm supposed to pick somebody up at the Wilkes Barre, PA airport Friday morning. So nobody's open to check it out. Any ideas? Should I risk the 3 hour round trip drive before getting this checked out?

    Posted via the PriusChat mobile app.
     
    #1 TSW, Nov 23, 2016
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,237
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    My hunch, no. Play it safe, they can take a cab.

    Might be overkill but who knows.
     
    #2 Mendel Leisk, Nov 23, 2016
    TSW likes this.
  3. TSW

    TSW New Member

    Joined:
    Nov 23, 2016
    4
    0
    0
    Location:
    US
    Vehicle:
    2012 Prius c
    Model:
    Four
    #3 TSW, Nov 23, 2016
  4. Sean Nelson

    Sean Nelson Active Member

    Joined:
    Dec 30, 2014
    421
    182
    0
    Location:
    Vancouver, BC Canada
    Vehicle:
    2012 Prius c
    You might try cycling the car on and off a few times, perhaps disconnecting and then reconnecting the 12V battery to "reset" the cars computer to see if the CEL goes away. If it doesn't, or if it reappears then I agree with Mendel - better safe than sorry.

    My understanding is that the CEL can be triggered by some pretty trivial things - for example, failure to properly screw on the gas filler cap. So I think it's worth at least an attempt at a resetting it. But I'm not an expert on it, so it might be wise to Google >"prius c" cel reset< to read up on it a bit.
     
    #4 Sean Nelson, Nov 23, 2016
    TSW likes this.
  5. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    The idiot light can indicate anything from a BS problem like a loose gas cap up to catastrophic failure. Without reading the codes there is no way of knowing. I would not disconnect the battery just to clear the code.

    I bought a ScanGauge for the additional instrumentation and the ability to read and clear codes.
     
    #5 JimN, Nov 24, 2016
    TSW likes this.
  6. IMkenNY

    IMkenNY Im just being nosy

    Joined:
    Mar 10, 2012
    477
    303
    6
    Location:
    Tropical Buffalo NY
    Vehicle:
    2012 Prius
    Model:
    Four Touring
    The Prius is completely safe to drive with a check engine light that is not flashing.
    If the check engine light is flashing it indicates a misfire condition that can damage the catalytic converter and in this case the Prius should not be driven.
     
    #6 IMkenNY, Nov 24, 2016
    TSW and Mendel Leisk like this.
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,237
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Didn't know that.
     
    #7 Mendel Leisk, Nov 24, 2016
    TSW likes this.
  8. TSW

    TSW New Member

    Joined:
    Nov 23, 2016
    4
    0
    0
    Location:
    US
    Vehicle:
    2012 Prius c
    Model:
    Four
    All my fluid levels are good and the gas cap was securely tight. I've also intermittently seen the air bag error light come on, but I don't know whether there's any connection. Seems as if I was able to do a CEL reset, it should come back on if there's still a problem. Agree?

    Posted via the PriusChat mobile app.
     
    #8 TSW, Nov 24, 2016
  9. IMkenNY

    IMkenNY Im just being nosy

    Joined:
    Mar 10, 2012
    477
    303
    6
    Location:
    Tropical Buffalo NY
    Vehicle:
    2012 Prius
    Model:
    Four Touring
    Yes, read the code if the check engine light returns.
    Unlike the hybrid error codes that need to be read with a computer loaded with the techstream software, check engine lights can be read with inexpensive OBDII readers.
    My local Walmart sells an inexpensive OBDII reader / reset tool for just under $20
     
    #9 IMkenNY, Nov 24, 2016
    icyrius, Mendel Leisk and TSW like this.
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,237
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    ^ I think this daschshund knows his stuff!
     
    #10 Mendel Leisk, Nov 24, 2016
    TSW likes this.
  11. TSW

    TSW New Member

    Joined:
    Nov 23, 2016
    4
    0
    0
    Location:
    US
    Vehicle:
    2012 Prius c
    Model:
    Four
    It's a solid light, not blinking. I'll have to buy one of those code readers, but I'll probably take it to Advanced Auto when I return from Wilkes Barre Airport. I found a different car to drive.

    Posted via the PriusChat mobile app.
     
    #11 TSW, Nov 24, 2016
  12. AtkinsonCycle

    AtkinsonCycle Junior Member

    Joined:
    Nov 21, 2016
    31
    21
    0
    Location:
    Pennsylvania
    Vehicle:
    2013 Prius c
    Model:
    Two
    Hello, TSW. I also have a 2013 C (mine's a Two), but no CEL. I live in south central PA. Not sure where you are at, but if you are close to me, I do have a working Techstream set up which would provide more detail as to the nature of the CEL on your car. Again, I am not sure if our locations are convenient, but I thought I would offer. Good luck. Hopefully, it's something easy and inexpensive.
     
    #12 AtkinsonCycle, Dec 3, 2016
(You must log in or sign up to post here.)