1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Charge cable brick protection

Discussion in 'Prime Plug-in Charging' started by Katwhitney, Feb 27, 2019.

  1. Katwhitney

    Katwhitney Junior Member

    Joined:
    Feb 15, 2019
    3
    0
    0
    Location:
    Nelson
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    I am Interested if anyone has a good solution to protect the brick part of the charge cable from outdoor weather? My partner made a wooden box to protect the end of the charger plug and brick to use at home. It also houses my heavy duty 10 gauge extension cord. It works great. See photo. However, I need a more portable, more simple solution to charge at work. Mostly concerned about the brick more than the plug which is slightly under cover. I heard that the brick needs to be kept dry. Perhaps a plastic bucket? Any suggestions?
     

    Attached Files:

    #1 Katwhitney, Feb 27, 2019
    Last edited: Feb 27, 2019
  2. Katwhitney

    Katwhitney Junior Member

    Joined:
    Feb 15, 2019
    3
    0
    0
    Location:
    Nelson
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    I am looking for hopefully an inexpensive solution.
     
    #2 Katwhitney, Feb 27, 2019
  3. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    I'm thinking a plastic bottle - bleach bottle or something - with the bottom cut out. Thread the plug through the top, seal up the top, let it hang down over the brick. power wheelchair people will just tape a plastic bag over their joystick, use it through the bag. There are sprays to make things water repellent, maybe that sprayed on the brick?
     
    #3 kenmce, Mar 11, 2019
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    incorrect info, the brick is waterproof and designed to be used outdoors in all weather conditions
     
    #4 bisco, Mar 11, 2019
    Mendel Leisk likes this.
  5. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,985
    8,886
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    If you must, use one of SOCKiTBOX | Weatherproof powercord connection box large enough to house the brick. I think the Large with dimension 330MM (W) 230MM (H) 140MM (D) works for this purpose. Only problem is that the electric plug cord is kinda short, that you may have to hang the box or rise a bit higher to the outlet to making sure the weight is not stressing the plug.

    That said, @bisco is half correct that the brick can be used outdoor. However, it is not "waterproof". It is only "weatherproof". The manual warns against using it in a condition where it can be submerged in the water or the outlet (and presumably brick as well) can get covered completely by accumulating snow.
     
    #5 Salamander_King, Mar 12, 2019
  6. Old Bear

    Old Bear Senior Member

    Joined:
    Sep 15, 2017
    712
    1,049
    20
    Location:
    Boston, Massachusetts USA
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Technically, it's "weatherproof" / "water-resistant" and, as Bisco points out, is designed to be OK in the rain, snow, wet ground, etc. It probably should not be submerged but probably would be OK sitting in a puddle.

    Like the Prime itself, it should not be operated at depths of greater than about 0.25 meters. ;)

    under water.jpg
     
    #6 Old Bear, Mar 12, 2019
    jerrymildred, kenmce, Mendel Leisk and 1 other person like this.
(You must log in or sign up to post here.)