1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake problems

Discussion in 'Gen 4 Prius Care, Maintenance and Troubleshooting' started by Jason z, Oct 24, 2021.

  1. Jason z

    Jason z Junior Member

    Joined:
    Jul 14, 2013
    5
    0
    0
    Vehicle:
    2016 Prius
    Model:
    Two Eco
    I have a 2016 prius eco two. I replaced the wheel bearing hub and accidently let the caliber pop out of the front left side. i put it back in bleed the brakes but since then every warning light is on. It has ABS fail and Low power to brakes. How can i reset these lights or go into a mode where i can bleed everything properly and reset the lights. The car drives fine and brakes.
     
    #1 Jason z, Oct 24, 2021
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Think you need Techstream and/or a visit to the dealership. How'd you bleed the brakes btw. See attachment:
     

    Attached Files:

    #2 Mendel Leisk, Oct 24, 2021
    vvillovv likes this.
  3. Jason z

    Jason z Junior Member

    Joined:
    Jul 14, 2013
    5
    0
    0
    Vehicle:
    2016 Prius
    Model:
    Two Eco
    OK ty. Is Techstream something i can buy or is it a dealer only item. If so whats the best one to purchase
     
    #3 Jason z, Oct 24, 2021
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Just getting the dealership to remedy things would be a lot cheaper, than buying Techstream legally: it's in the $1000's. You can get bootleg copies and aftermarket cables, and install on an old Windows laptop, but that's out of my league.
     
    #4 Mendel Leisk, Oct 24, 2021
(You must log in or sign up to post here.)