1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake Problems - replaced pump assembly, intermittent problem?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by tbone5803, Nov 11, 2024 at 4:00 PM.

  1. tbone5803

    tbone5803 Junior Member

    Joined:
    Oct 22, 2017
    38
    10
    0
    Location:
    Des Moines
    Vehicle:
    2013 Prius
    Model:
    Two
    I own a 2013 Prius. My brake pump went out recently and I had that replaced. I however didn't have the master brake cylinder replaced. Everything seemed fine after getting my car back but lately when I drive, I lose the ABS brakes and the dash lights up again. It will turn off for awhile again after 10 minutes of driving. I'm guessing the master brake cylinder also needs replaced? Unfortunately I can't run the codes as nothing shows since the warning lights turn off again once I return home. Tried but nothing populates.

    It would have to be the pump assembly already having had failed (unlikely?), since I just had it replaced with a new one.

    OR

    The master brake cylinder failing.

    Is it always suggested to have these two repairs done together?
     
  2. tbone5803

    tbone5803 Junior Member

    Joined:
    Oct 22, 2017
    38
    10
    0
    Location:
    Des Moines
    Vehicle:
    2013 Prius
    Model:
    Two