1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake pedal too high?

Discussion in 'Gen 4 Prius Main Forum' started by Bibbins, Jan 8, 2019.

  1. Bibbins

    Bibbins New Member

    Joined:
    Jan 8, 2019
    2
    0
    0
    Location:
    Canada
    Vehicle:
    2017 Prius
    Model:
    Base
    My wife and I are considering purchasing our first Prius, a 2017 base model.

    We've rented a bunch of different models through the years and loved them all, but after taking the test drive today we were shocked to find that the brake pedal seemed set very high. My wife who never had any problems with other Prius models could only put part of her foot on the pedal.
    • Has anyone heard of issues like this with the 2017?
    • Is there a way to adjust the height of the brake pedal? (I've looked online and not found anything so far)

     
  2. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,587
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    It's about in the same position as most cars, and better than some. Too high for heel/toe gearchanges, but seeing it hasn't got a manual gearbox, it's fine.

    Try driving a different PRIUS in case there was a problem - and no, there is no adjustment.

    You can adjust the seat up and down, forward and back and the lumbar - which might change it.

    With DRCC, you tend not to use the brake pedal too much, as regenerative braking does a lot of your slowing down.
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    never and no. i would measure it and a gen 3
     
  4. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,801
    11,363
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    I am not sure what you are calling the base model. My trim Two is fine. A lower Trim One was introduced halfway through 2017. All 2016 and newer Prius Liftback have the same pedals and mountings.
     
  5. liquidtenmillion

    liquidtenmillion Active Member

    Joined:
    Jan 30, 2016
    261
    194
    0
    Location:
    Easley, SC
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I have not noticed a difference between my 2015 and 2017, I suspect there was something wrong with the brake pedal in your gen 3 or the specific gen 4 you are looking at. Brake pedal position should be the same on all gen 4.
     
    Prodigyplace likes this.
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,701
    39,239
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah, just to make sure it's not some factory defect: if they've got any other 4th gen Prius on the lot, sit in another one.
     
    Prodigyplace and alanclarkeau like this.
  7. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Yes, there is, but I agree with @Mendel Leisk's advice to compare with another example of the same model.

    The Repair Manual (more info) has an inspection and adjustment procedure, under Brake: Brake System (Other): Brake Pedal: Adjustment. Checking the brake pedal height requires some disassembly of interior trim, to get to the reference points for the measurement, which the manual shows in a diagram. Pedal height isn’t something you’d typically adjust for individual preference: the difference between the greatest and least allowable pedal height is only 10 mm (for model years 2016–2018) or 14 mm (for model year 2019), and the free play and reserve distance must also be within specified limits.
     
    alanclarkeau and Mendel Leisk like this.
  8. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,587
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Thanks - I thought about that later. It's typically something (on previous cars) which I would check (and if necessary adjust) against specification, but not for preference. I just looked up my last PRIUS invoice - they'd changed Brake Fluid - and there is a line item:

    "Checked brake pedal height & hand brake lever operation".

    [as an aside - I wonder if they actually found a "hand brake lever" - I haven't :eek:]