1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake Pad and Possible Rotor Replacement

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Jeff S., Jul 21, 2016.

Tags:
  1. Jeff S.

    Jeff S. Junior Member

    Joined:
    Jun 11, 2016
    17
    2
    0
    Location:
    Michigan
    Vehicle:
    2009 Prius
    Model:
    Two
    I read on another thread that replacing the pads and rotors on a GEN II prius is no different than on most other cars and your typical mechanic can do it as long as they disconnect the 12V battery before they begin work.

    Therefore I intend to go with the lowest bidder but I have a few questions.

    1. Does the 12V battery need to be disconnected just to "check the brakes"
    2. Should I wait till they are at 1mm before I have the pads replaced or is it wise to do it at 2 or even 3 mm?
    3. Knowing the car has 138K miles and this will likely be the last time the pads are replaced, is there a specific type of pad I should look for?
    4. Any other advice?

    Detroit Area
     
    #1 Jeff S., Jul 21, 2016
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you can check pad thickness and disc condition without removing 12v. at this point, i would get oem pads and discs and move on. $400. or less is a good price. all the best!(y)
     
    #2 bisco, Jul 21, 2016
    Jeff S. likes this.
(You must log in or sign up to post here.)