1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Brake Master Cylinder Failure

Discussion in 'Gen 3 Prius Main Forum' started by Shank, Aug 14, 2022.

  1. Shank

    Shank Junior Member

    Joined:
    Sep 25, 2016
    10
    3
    0
    Location:
    Vermont
    Vehicle:
    2007 Prius
    Model:
    Five
    I have a 2010 Prius with 135,000 miles. Last year I changed the rear brake pads and a month later the brake master cylinder and brake booster failed and it was almost $2,000 to replace.

    When I changed the pads I did not bleed the caliper while turning the piston back into the caliper because I've never done that before in 30 years of doing my own repairs. Now I'm reading from some sources that if you don't bleed while compressing damage to the master cylinder may be the result.

    I know there is a history of problems with this part on the Prius including a class action lawsuit, but what is your opinion - did I cause the failure by not bleeding the caliper or is it just a coincidence? It has kind of been haunting me ever since.
     
    #1 Shank, Aug 14, 2022
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,386
    1,794
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Possibly but who cares now You've done put the 4K in the mess to fix it so. Or whatever it cost I just threw that figure out there I have no idea 2950 whatever. Hind sight generally isn't 20/20. I wouldn't have bled I would have just cracked dessert fitting at the offending caliper so as I screw the caliper down or squeeze it down the pressure I'm squeezing with my big 24-in pliers is not running back through the line to the actuator master cylinder and pump is squirting out dessert fitting on the ground on a towel or hitting the fender liner that way I know my pressure that I'm creating hasn't done anything except exit the caliper. I do that on cars that don't have ABS in actuators like before all that existed I always cracked the zerk that wheel. Watch the fluid exit on compression close the zerk .
     
    #2 Tombukt2, Aug 14, 2022
  3. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Coincidence. No mention of this in the attached.
     

    Attached Files:

    #3 Mendel Leisk, Aug 14, 2022
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    It wouldn't be easy to tell after the fact. That's pretty much why I open the bleeders when I shove pistons back. That way I won't be haunted later by an unanswerable question.
     
    #4 ChapmanF, Aug 14, 2022
    Tombukt2 likes this.
  5. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    But won't we always be haunted by unanswerable questions? Suspect it's the value of the human experience at such an early stage of our mostly malformed consciousness.
     
    #5 PriusCamper, Aug 14, 2022
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I might be haunted by some other unanswerable question.

    Just not by the one about whether I knackered my $$$$ brake actuator by back-forcing old fluid through it.

    There are questions it's nicer to be haunted by than others.
     
    #6 ChapmanF, Aug 14, 2022
    Last edited: Aug 14, 2022
(You must log in or sign up to post here.)