1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Bluetooth sync problem

Discussion in 'Gen 2 Prius Main Forum' started by mtk525, Dec 4, 2007.

  1. mtk525

    mtk525 Junior Member

    Joined:
    Aug 29, 2007
    6
    0
    0
    Location:
    Northern Illinois
    Vehicle:
    2007 Prius
    Model:
    Three
    Is there a way to reset the bluetooth system on my 07 Prius. My KRZR worked perfectly until today. I tried syncing them by reseting the KRZR and shutting off the Prius and resarting it with no luck. I removed the profiles on both the Prius and KRZR to start fresh and that did not work. I set my KRZR back to factory settings and still no luck. I tried to push a contact over to the Prius and found the Prius. I entered the passcode and got a message on the KRZR that it does not support the system. I got my old RZR that also worked before my KRZR and it also will not connect. Any ideas???
     
  2. ceric

    ceric New Member

    Joined:
    Oct 30, 2004
    1,114
    53
    0
    Location:
    Fremont, CA
    Vehicle:
    2005 Prius
    If multiple cell phones failed to connect (they were able to) with your Prius,
    then, the Bluetooth module in your Prius may be the problem.
    If I were you, I would find another cell phone (from friend?) and try it out just to make sure before I bring the Prius to the dealer. Good luck.
     
  3. mtk525

    mtk525 Junior Member

    Joined:
    Aug 29, 2007
    6
    0
    0
    Location:
    Northern Illinois
    Vehicle:
    2007 Prius
    Model:
    Three
    I just took my wife's RZR out and it worked. I might have created the problem when I cleared the phones out of the history on both the Prius and the phones.
     
  4. mtk525

    mtk525 Junior Member

    Joined:
    Aug 29, 2007
    6
    0
    0
    Location:
    Northern Illinois
    Vehicle:
    2007 Prius
    Model:
    Three
    Is there a way to reset the bluetooth module on the Prius? I think corrupt information is stuck in the Prius' bluetooth module even though it shows no phones synced. That is why I can sync new phones and not phones that I synced in the past.