1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Bad Head Gasket or too much Anti-seize?

Discussion in 'Gen 2 Prius Main Forum' started by T.S. Elliot, Sep 10, 2022.

  1. T.S. Elliot

    T.S. Elliot Junior Member

    Joined:
    Jul 1, 2015
    60
    15
    0
    Location:
    Desolation Row
    Vehicle:
    2007 Prius
    Hello all, I have a 2007 Prius with 210k miles. It has no problems or symptoms. I just changed spark plugs and now have concern for a bad head gasket. I previously changed them myself at 115k. At that time, I used anti-seize on the threads. I have since learned not to do that. The plugs didn't feel great coming out, but they did make it out and the excess anti-seize didn't seem to be causing too many problems so I went ahead with the job until I got to the last cylinder (driver side). That one had the most anti-seize by far. The area immediately above the threads was gunked up by it. You can CLEARLY see the stuff at the tip of the coil is anti-seize so I'm not worried about the tip. My concern is near the middle of the coil with all of the brown film? Seems like oil? Inside the well you can see there is discharge/gunk on about 1/3 of the circumference.

    I cleaned everything back up and re-installed because by the time I got to #4 I was just expecting a little funkiness from the anti-seize but now I'm second guessing myself... Priuschat detectives - what's the verdict?

    p.s. running an oil catch can for 80 or 90k miles will eliminate the oil in the bottom of the throttle body. Not sure if the debate about the source of the oil being from the PCV or Atkinson cycle is still alive, but I think this just about settles it.

    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,386
    1,794
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    You must mean valve cover gasket not the cylinder head gasket. Looks like you need a valve cover gasket and the spark plug o rings maybe but even so it's pretty clean I don't think the one NZ really has head gasket issues they may fail it really high mileage but then anything can fail but these aren't known for it I don't believe.
     
    PriusCamper likes this.
  3. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,671
    1,716
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    It does look like oil residue from a very minor valve cover gasket seep where it seals at the spark plug bore.

    Unless there is oil residue from seepage along the outside of the valve cover, I would leave it alone. If you want, pull a coil in a year or two and see if the seeps have gotten worse.

    Posted via the PriusChat mobile app.
     
  4. highmilesgarage

    highmilesgarage Active Member

    Joined:
    Jul 28, 2022
    340
    125
    0
    Location:
    Kansas City
    Vehicle:
    2007 Prius
    Model:
    Touring
    nothing to be concerned about, the oil seepage is very minimal. If your spark plug is drenched with oil and causing misfires then you have to replace the valve cover gasket (not the head gasket) Usually it's oil at the tip of the boot and in the spark plug that you need to visually check.
     
  5. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Yea, what he said about bad valve cover gasket. Way easier than doing a head gasket.