1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Anyone Install a third party BSM on their prime? (blind spot monitor)

Discussion in 'Prime Accessories and Modifications' started by Mavi, May 1, 2020.

  1. Mavi

    Mavi Active Member

    Joined:
    Oct 12, 2015
    484
    285
    0
    Location:
    San Diego,ca
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    So anyone install one of the many universal blind spot monitors on their Prius Prime? Curious to see how they turned out and how their sensitivity is.
     
  2. George W

    George W Senior Member

    Joined:
    Mar 12, 2018
    911
    513
    1
    Location:
    San Antonio
    Vehicle:
    2008 Prius
    Model:
    Touring
    20200501_165020.jpg
     
    AldoON and CookinWithPooh like this.
  3. GSP_Prius

    GSP_Prius New Member

    Joined:
    Dec 24, 2021
    18
    3
    0
    Location:
    NJ
    Vehicle:
    2022 Prius Prime
    Model:
    LE
    28B6D5A2-1005-4F80-A927-5108DB86CA2A.jpeg 08AC657B-DB62-482F-AA68-4583C36232C5.jpeg
    sensitivity good but need to find out which wires are for signal turns and backup light. Does anyone know which wires are convenient to tap into?
     
  4. GSP_Prius

    GSP_Prius New Member

    Joined:
    Dec 24, 2021
    18
    3
    0
    Location:
    NJ
    Vehicle:
    2022 Prius Prime
    Model:
    LE
    So follow up on determine wires:
    I found the rear wire - needed for backup feature.
    See image attached.

    Might be tricky to know which wire is signal left or right. Was thinking to follow wires to the signal wires but would have to go under car to follow. Might do it or just test all the tires for power. Hopefully only signals are powered.
     

    Attached Files: