1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Any one install DEI 530T down/up window module in 2011 yet?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by rrg, Oct 16, 2011.

  1. rrg

    rrg Active Member

    Joined:
    May 18, 2010
    458
    120
    41
    Location:
    East coast - NJ
    Vehicle:
    2011 Prius
    Model:
    Two
    Anyone install the DEI 530T window down/up module in a 2011 or 2010 yet?

    I know the car, stock, can do one touch down or up one window at a time or hit all buttons for all windows at once.

    I want to add the module first and next figure out how to add it the Prius II stock remote.

    Looking for pointers or DIY install guide before I dig in.
    Thx.
     
    #1 rrg, Oct 16, 2011
  2. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    760
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    The rear window slows down at the top and at the bottom which suggests it has position sensor. I wouldn't recommend adding a 530T to the Prius. If you're going to wire it up to the stock remote, I suggest you figure out how to get aux out from the stock remote first before adding the 530T
     
    #2 cproaudio, Oct 16, 2011
  3. Teakwood

    Teakwood Member

    Joined:
    Jun 23, 2010
    491
    73
    0
    Location:
    New Mexico
    Vehicle:
    2010 Prius
    Model:
    II
    Uhh, wha-fo' you want to do this thing?
     
    #3 Teakwood, Oct 16, 2011
  4. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    What does it do that the stock can't do?
     
    #4 32kcolors, Oct 17, 2011
  5. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    760
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    remotely roll up the windows
     
    #5 cproaudio, Oct 17, 2011
  6. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    I assume down too. I have that in the Lexus. Really useful for airing out hot air when approaching from a distance.
     
    #6 32kcolors, Oct 17, 2011
  7. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    760
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    rolling up requires 1 channel, rolling down requires another channel. If you only have 1 channel to work with, up would be the choice. But, yeah, remotely roll up and down the windows.
     
    #7 cproaudio, Oct 17, 2011
  8. rrg

    rrg Active Member

    Joined:
    May 18, 2010
    458
    120
    41
    Location:
    East coast - NJ
    Vehicle:
    2011 Prius
    Model:
    Two
    The goal is to roll down windows via stock remote. Don't want a second remote in pocket.
     
    #8 rrg, Oct 19, 2011
  9. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    man, a long while back I got barked at because I wanted an "all up/down" button. Yeah, I left one down a couple times, and it rained - I just didn't know it was still down. So, an all up/down button would rock.
     
    #9 mgb4tim, Oct 21, 2011
  10. rrg

    rrg Active Member

    Joined:
    May 18, 2010
    458
    120
    41
    Location:
    East coast - NJ
    Vehicle:
    2011 Prius
    Model:
    Two
    The only electrical diagram I found online is for the 2010.
    Can someone confirm it is the same as the 2011?

    I am taking this idea to a few installers and see what they say.
     
    #10 rrg, Oct 22, 2011
  11. cproaudio

    cproaudio Speedlock Overrider

    Joined:
    Jul 7, 2010
    2,401
    760
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    V
    10 and 11 should be the same. If you're insist on using the factory remote, you can try to build your own channel expansion. You can use the lock to trigger a pulse to timed relay and set the time to 3 seconds. You can then use the unlock as the aux channel out to trigger the auto window down. The operation would go like this, to roll the windows down, hit the lock and with in 3 seconds, hit the unlock and watch your windows roll down. It won't affect the power door lock functions. They will still lock and unlock.
     
    #11 cproaudio, Oct 23, 2011
  12. rrg

    rrg Active Member

    Joined:
    May 18, 2010
    458
    120
    41
    Location:
    East coast - NJ
    Vehicle:
    2011 Prius
    Model:
    Two
    Sounds good.
    I am researching/learning right now.
    Thank you.
     
    #12 rrg, Oct 23, 2011
(You must log in or sign up to post here.)