Any Idea What This Connector Does?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Hal.9000, Jan 20, 2025 at 11:23 PM.

  1. Hal.9000

    Hal.9000 New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    USA
    Vehicle:
    2009 Prius
    Model:
    N/A
    2009 Prius. This connector is behind the windshield washer fluid reservoir and left of the brake fluid level sensor. The wires are severed at both ends. I can't find much reference to it. The only thing I could find is (maybe) a diagram that calls it S2 and S3 "Short Connector".

    PXL_20250119_212346165.jpg PXL_20250119_212349937.jpg
     
  2. MAX2

    MAX2 Member

    Joined:
    Aug 12, 2024
    415
    106
    18
    Location:
    Third planet from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,872
    1,879
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    What you would do here is go to a junk car sitting at a tow lot and cut that connector off with wires coming out of it aplenty if you will put some butt connectors or however you do your joinery from the wiring that you just cut with the plug to your car which is severed by animals or whatever should be no problem You do need the connection to be there if you don't have a junkyard and you can't get to it I may have one here so on and so forth whatever it takes