Another TPMS question

Maybe one or more of the sensors has died?

I'm on the same wavelength: I'd just ignore it, periodically check pressures. I don't fuss with tape on the light, just messes things up.

At least until you're replacing that set of tires.

 

Techstream for sure, maybe some of the aftermarket gizmos too.

There's a couple of experts here, who's user names escape me of course. Someone Tracy? And the New England guy?

 

Yap, as @Mendel Leisk said, flashing TPMS and staying on is the indication of faulty TPMS system, very likely dead sensor.

Whatever you do, don't take your car to a dealer. Yes, they can fix it but will cost $$$. Most tire shops are equipped to diagnose and fix the problem for much less. If you know a friendly tire shop, they may even scan the sensor for free to let you know which one is not working. Or else you need to buy a TPMS tool that can scan and diagnose like Autel TS408 or better.

 

Yap, just like you have been doing during winter, you just have to keep ignoring the light rest of the year.

 

I don't know about C, but for my PRIME the TPMS light was way to the right side of the dash. I didn't have to do anything to ignore it. Totally out of sight.

 

I use external TPMS sensors on my tires, so I don't have to check the tire pressure with a gauge. They are ugly, but far more functional than OEM TPMS in PRIUS that shows no information.

 

Yeah, working yourself into a lather of this could be expensive. Inertia, not a bad guiding principal.

 

If you don't have annual state inspections, and can reliably monitor tire pressures the old fashioned (before TPMS) way, then you have nothing to worry about, compared to the pre-TPMS era.

But if you must pass an annual inspection, then this dead sensor will need to be replaced.

 

MA has inspection, but TPMS is not required to be functional to pass the inspection. Vermont, Rhode Island, West Virginia and Hawaii are the only four states that require functional TPMS. I believe Vermont was trying to change that law to remove the TPMS requirement.

 

I've heard so many complaints on this over the years, that I was unaware that so many inspection states didn't actually require functioning TPMS.

 

I too have heard from many people that warning light on the dash is automatic "fail" on inspection. Because of that false information, I believed I had to have functional TPMS to pass the inspection when I bought the first car with TPMS many years ago. Thinking I had to fix TPMS each time the sensor failed, I spent close to $800 on TPMS sensor replacement on that car at a dealer. I did not know then what a waste that was.

The state inspection in many stations does not even follow the protocol very strictly. There are many stations that don't even know about the law. I've taken my old car to one station for inspection and it failed my car due to needing to replace the rusty brake line. But there was no leak. And the brake was fully functional. As it turned out, the law requires that the brake has to be functional but there is no clause about corrosion on the brake line. Any car driven in NE winter roads has some degree of surface rust on the brake line. Mine was no exception. I took the same car to the different inspection stations, and they passed my car no question asked.