1. Attachments are working again! Check out this thread for more details and to report any other bugs.

after a new 12V battery

Discussion in 'Gen 2 Prius Technical Discussion' started by PatchII, Jan 15, 2011.

  1. PatchII

    PatchII Junior Member

    Joined:
    Jan 12, 2011
    8
    0
    0
    Location:
    New hampshire
    Vehicle:
    2005 Prius
    Model:
    N/A
    I had my toyota dealer replace my 6 year old little 12 Volt battery a few days ago, and now my drivers side window will not go down or up in atuo mode like before. i will go up and down, but I have to hold the switch like on the other 3 windows.

    can this be the result of swapping battries, and not having a seperate battery plugged in to hold the settings? My radio stations are not there now, had to reprogram them.

    Is there a fix for this, or should i take it back to the dealer.

    I haven't noticed any other problems as a result of the battery replacement.

    I was getting the red triangle on the dash light cluster, just momentarily upon start up before the swap out, but now it doesn't come on, just as it never did for the years before the battery started losing it's punch


    Any thoughts???

    Thanks
     
    #1 PatchII, Jan 15, 2011
  2. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    It's explained in the owners manual, but:
    1. Roll window about 1/2 way down.
    2. Roll window up fully and hold the switch in the up position for a few extra seconds.
    3. Done. Test to see if auto up and down works.
     
    #2 David Beale, Jan 15, 2011
    1 person likes this.
  3. Hal W

    Hal W New Member

    Joined:
    Sep 26, 2010
    872
    53
    0
    Location:
    Grand Forks,B.C. Canada
    Vehicle:
    2006 Prius
    Model:
    II
    Try pushing the control switch a bit harder. I believe it determines mode by pressure? H
     
    #3 Hal W, Jan 15, 2011
  4. eestlane

    eestlane Member

    Joined:
    Sep 29, 2007
    110
    11
    0
    Location:
    Space Coast, FL
    Vehicle:
    2007 Prius
    Please read the pertinent section of the owners manual, there is a procedure for you to correct this condition.
     
    #4 eestlane, Jan 15, 2011
  5. PatchII

    PatchII Junior Member

    Joined:
    Jan 12, 2011
    8
    0
    0
    Location:
    New hampshire
    Vehicle:
    2005 Prius
    Model:
    N/A
    Thank you so much for the replies. I just did the "hold the button in the up " trick and it's fine now

    I brought the manual in the house a few years ago to study up on somthing and my wife put it some place "safe" never to be seen again.

    After 6 years this had been the least troublesome car I ever owned. only 58K miles on it, hope it stays that way til I can get my hands on a plug in version.

    thanks again all
     
    #5 PatchII, Jan 15, 2011
  6. BAllanJ

    BAllanJ Active Member

    Joined:
    Dec 9, 2008
    667
    78
    0
    Location:
    Kingston Ontario
    Vehicle:
    2017 Prius
    Model:
    Two
    I actually think the dealer should have done this for you, but now you know that part of the procedure when you change your own next time.... now on to re entering your radio presets and your cell phone contacts and dissabling the reverse beep.... and anything else you changed from the default.
     
    #6 BAllanJ, Jan 15, 2011
(You must log in or sign up to post here.)