Adding a start button to a C2

haven't seen an oem style install. I'd love to see if it is possible though.

this is the next closest thing I have seen:

Upgrading to keyless entry and push button start for less $ | PriusChat

 

make it happen and let us know

There was one on ebay and someone bought it... was it you?

 

I would like to have the button in that spot. Would use it to do something else though. Don't need it to start the engine since the key will do it and I have to put it in anyway. Just do not like that round indentation i my dash.
Dan

 

I would also like to have another switch to fit left of steering wheel on dash. I got one with my fog lights and filled one hole. Need one more to remove the plug and install.
Dan

 

The Prius OEM Start Button can be used on the Aftermarked Advancekeys system, they confirmed it even on their website, since they design it according to Toyota / Lexus Start button.. I write that on the keyless entry page linked above.

I'm planning to do that around summer (first the Navi)

 

To do the factory start and stop feature will be impossible and cost more than trading your car for a C3, I have all the diagrams and it require 2 additional computer unit and additional wire sensor, missing wire in the main harness , door, which you will not have in C2/C1, then additional touch sensor for all door and a new steering wheel lock module, new plastic piece, and a new LAN communication wire harness in additional to programming need to be done in the ECM to support, missing transponder key amplifier, transponder key wiring, and transponder key ECU, that which I am not sure if it is possible, even if you buy all the parts from a totaled prius. If you want 100% OEM from Toyota, better just trade in and buy a C3 otherwise the above post aftermarket version with factory switch will be the only option. But for $1500 more for C3, you mind as well get that.


In summary, THERE IS NO WIRE Harness behind the dash to support any part for Keyless Startstop function from a C3 to a C2.

Yes you can buy the switch and put in there since it is a dummy plug but there is no wire on there to do anything.

 

If you use a momentary start button, all you would have to do is connect it to the wires at the key "start". So you would have to put the key in, move it to the "on" position (or whatever is just before "start"), then push the button. To turn off the car you would have to turn the key off.

I'm not so sure you can get a push button to turn the car off as it would still have connection with the key.

 

Has anyone seen the button for sale? Also, does anyone know where I can get another switch to fit the holes to left of steering wheel?
Dan

 

there are many buttons on ebay from the regular prius, or you can get aftermarket ones from TRD/TOMS/etc

ive seen prius c ones pop up once in awhile. but not that often.

 

Be sure to buy the 2010-2012 ones:

• The 2010-2012 have two rows of pins.

• The 2004-2009 have single row of pins.

 

Where do yall see them, ebay? I just dont like that big indentation in my dash and want to fill it. I might be able to buy the little rocker for the left side of wheel at the dealer.
Dan

 

Okay, found the start engine button. Now I am still looking for the push in switch for the left side of steering wheel. I have the fog light switch in one hole and would like to find a matching switch for the other hole.
Dan