1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Accumalator

Discussion in 'Prius v Technical Discussion' started by Eric mbaabu, Jul 16, 2020.

  1. Eric mbaabu

    Eric mbaabu New Member

    Joined:
    Jul 16, 2020
    10
    0
    0
    Location:
    Mombasa kenya
    Vehicle:
    2012 Prius Alpha
    Model:
    V
    Hi,my prius has the C 2153 c 2152 and C 2156 codes, a beeping sound and warnibg lights on the dash,when doing some inspection i noticed that the accumalator is labeled "do not replace" so what does that mean since the scanner says low pressuer from the accumalator,the rear breaks are not working and the break pedal pushes back.

    Posted via the PriusChat mobile app.
     
  2. Tim Jones

    Tim Jones Senior Member

    Joined:
    Jul 17, 2018
    1,728
    560
    3
    Location:
    SE Texas
    Vehicle:
    2011 Nissan LEAF
    Model:
    ----USA----
    UH OH..... you might need the dreaded pump and master cylinder replaced. I had to on mine..... I didn't have codes just pump running all of the time.
    How many miles on it? The rear brakes run off the pump.... front pedal pressure.
     
  3. Eric mbaabu

    Eric mbaabu New Member

    Joined:
    Jul 16, 2020
    10
    0
    0
    Location:
    Mombasa kenya
    Vehicle:
    2012 Prius Alpha
    Model:
    V
    Well,the interesting part is that the break master cylinder is separated from the booster accumulator, so i don't understand how to go about it, and now you can't hear the pump sound ,it has 121788 miles on it,so how do I know what exactly is wrong,is is theatre cylinder or the break accumulator booster?

    Posted via the PriusChat mobile app.
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    check with toyota to make sure there isn't an extended warranty