1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Abs, brake and anti skid light

Discussion in 'Gen 3 Prius Main Forum' started by Docnadler, Mar 19, 2017.

  1. Docnadler

    Docnadler Junior Member

    Joined:
    Aug 19, 2011
    7
    0
    0
    Location:
    florida
    Vehicle:
    2010 Prius
    Model:
    II
    I have 2010 Prius with 180k
    The anti skid light, brake light and abs light all went on
    I brought it to a local mechanic, he checked it out and said he did not recommend that
    I do anything
    Just drive with the lights on!
    Any thoughts or suggestions?
    Thank you
     
    #1 Docnadler, Mar 19, 2017
  2. ForestBeekeeper

    ForestBeekeeper Active Member

    Joined:
    Sep 19, 2011
    744
    289
    0
    Location:
    Maine
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    My 2011 did that.

    It still drove just fine.

    Dealership said it was the brake pump failing. They had never seen one fail before. It took 2 weeks for them to get a replacement in stock, we drove it the whole time with no problems. They finally replaced the pump and it seems fine.
     
    #2 ForestBeekeeper, Mar 19, 2017
  3. Sam Spade

    Sam Spade Senior Member

    Joined:
    Dec 3, 2016
    2,036
    1,023
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    THIS is an example of why I think that advice to the OP is generally bad.
    If the brake pump completely fails, I think you will have NO BRAKES.

    OTOH, if it is some other component of the ABS system.....like a wheel speed sensor maybe......then you will still have conventional brakes just no ABS, anti-skid or traction control. That still is a risk but fairly small probably.

    You at least need to know what component is failing before deciding what to do (or not do).
    I think a second opinion is in order.
     
    #3 Sam Spade, Mar 19, 2017
  4. Docnadler

    Docnadler Junior Member

    Joined:
    Aug 19, 2011
    7
    0
    0
    Location:
    florida
    Vehicle:
    2010 Prius
    Model:
    II
    The mechanic ran a computer check and the code I believe said wheel sensor
    The car rides fine
    I can't tell about the abs brakes
     
    #4 Docnadler, Mar 19, 2017
  5. Sam Spade

    Sam Spade Senior Member

    Joined:
    Dec 3, 2016
    2,036
    1,023
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    Any time the ABS warning light is ON, the ABS feature is not functional.
    "Normal" braking will still work though.
    Only you can decide if you want to risk driving it with some of the safety features not working.
    If you can afford to have it fixed, you SHOULD.
     
    #5 Sam Spade, Mar 19, 2017
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Why not pull the codes and post 'em here? Then we'll have a better idea what the situation is.

    You can do that with a short piece of wire.

    -Chap
     
    #6 ChapmanF, Mar 19, 2017
    xiiixiixiiix and Raytheeagle like this.
(You must log in or sign up to post here.)