1. Attachments are working again! Check out this thread for more details and to report any other bugs.

32 mph Lane Departure Message

Discussion in 'Gen 4 Prius Care, Maintenance and Troubleshooting' started by zzyzx999, Aug 5, 2017.

Tags:
  1. zzyzx999

    zzyzx999 Junior Member

    Joined:
    Jul 22, 2017
    1
    3
    0
    Location:
    Seatte
    Vehicle:
    2017 Prius
    Model:
    Four
    Hi all,

    I have LDA enabled, and I get a warning message whenever the car drops below 32mph that LDA is disabled below this speed. This message only happens the first time the car falls below 32mph on the trip. I'm obviously quite aware of this fact now (since the pop up happens on *every* trip), and I was wondering if there is any way to disable this message going forward (besides just turning off LDA).

    Thanks.
     
    #1 zzyzx999, Aug 5, 2017
    'LectroFuel, RCO and robsnyder20 like this.
  2. robsnyder20

    robsnyder20 Active Member

    Joined:
    Aug 13, 2012
    374
    301
    0
    Location:
    SW Florida USA
    Vehicle:
    2016 Prius
    Model:
    Three
    I am pretty sure there is no way to disable the stupid warning message, as I have searched for the same message and how to disable it, without disabling all pop up messages. Eventually after a while, you will ignore it like me. By the way, congrats on your new prius purchase and welcome!
     
    #2 robsnyder20, Aug 5, 2017
    RCO, kithmo and zzyzx999 like this.
  3. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,587
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    No - maybe they put it there for legal reasons - telling you that that particular safety feature isn't working any more, and they feel we need a daily reminder.
     
    #3 alanclarkeau, Aug 6, 2017
    Prodigyplace, 'LectroFuel and RCO like this.
  4. pilotgrrl

    pilotgrrl Senior Member

    Joined:
    Jul 23, 2017
    891
    1,797
    0
    Location:
    Chicagoan in TX
    Vehicle:
    2016 Prius
    Model:
    Three
    Sounds like a question for someone who has Carista, perhaps?
     
    #4 pilotgrrl, Aug 25, 2017
  5. robsnyder20

    robsnyder20 Active Member

    Joined:
    Aug 13, 2012
    374
    301
    0
    Location:
    SW Florida USA
    Vehicle:
    2016 Prius
    Model:
    Three
    I have carista and cannot do anything with the message, good thought though
     
    #5 robsnyder20, Aug 25, 2017
  6. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Toyota’s Repair Manual has several lists of “Customize Parameters” that can be changed using the multi-information display or Toyota Techstream software. None of the lists mentions any option to disable the Lane Departure Alert System is Unavailable Below Approx. 32 MPH message.

    The Meter/Gauge System section of the Repair Manual says the combination meter shows this message when it receives a “Speed condition failure text display signal” over a CAN bus from the forward recognition camera. I imagine the message could be suppressed by changing the meter or camera firmware, but as a practical matter, I think we’re stuck with it.
     
    #6 Elektroingenieur, Aug 26, 2017
  7. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,799
    11,362
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    Much like the warning whenever you turn on DRCC about only using it on freeways...
     
    #7 Prodigyplace, Aug 26, 2017
    pilotgrrl and RCO like this.
(You must log in or sign up to post here.)