1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2014 Starting and stalling, with cringeworthy sounds

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by metrogtiguy, Nov 17, 2021.

  1. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    I've been clearing codes one at a time, and finally got it to the point where it will start, and not throw codes. I've pulled and cleaned the intake, throttle body, replaced the fuel pump, new fuel, cleaned the tank, pulled and cleaned all the sensors. Now, it starts, kind of. It starts to sputter and stall. Has anyone seen this condition? It isn't throwing any codes anymore. I even checked in Techstream, and all looks normal. Hoping to find a place to start looking :). Thanks!

     
    #1 metrogtiguy, Nov 17, 2021
    Last edited: Nov 17, 2021
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,164
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how many miles on her?

    what is the history?
     
    #2 bisco, Nov 17, 2021
    Mendel Leisk likes this.
  3. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,502
    5,065
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Head gasket. If not its a serious misfire.


     
    #3 rjparker, Nov 17, 2021
  4. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Plugs and coils?
     
    #4 tankyuong, Nov 17, 2021
  5. 2010moneypit?

    2010moneypit? Active Member

    Joined:
    Oct 26, 2021
    314
    122
    0
    Location:
    Beaumont ca
    Vehicle:
    2010 Prius
    Model:
    V
    Oil?
     
    #5 2010moneypit?, Nov 17, 2021
  6. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Did you leave the EGR valve connector unplugged? Maybe the valve is partially open?

    Posted via the PriusChat mobile app.
     
    #6 xliderider, Nov 17, 2021
  7. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    The history is sketchy on the car. It was pretty taken apart, and had a "new" engine installed before I bought it, but the install was never finished.

    105k on the car, 85k on the engine
    Fresh oil and coolant (water pump is working)
    Changed spark plugs, they were all nice and tan, no evidence of headgasket failure
    Coils are original, but not throwing misfire codes.
    Haven't messed with the EGR yet. Would a plugged/leaky EGR make it so it flat out won't stay running?

    Any good tips on checking for fuel pressure? I didn't see a service port.
     
    #7 metrogtiguy, Nov 18, 2021
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,164
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    clogged injectors?
     
    #8 bisco, Nov 18, 2021
  9. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    That's actually what I've been thinking. The gas sat in the car for 2 years, and had crystals in the gas tank. It rained all day, so I couldn't pull the fuel rail. But I think there might be some serious junk in there too. Weather is supposed to be better tomorrow.
     
    #9 metrogtiguy, Nov 18, 2021
    bisco likes this.
  10. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    Update: Pulled the injectors today, hooked them up to a 9v battery... Absolutely nothing flowed through them. Ordered a kit to force fuel injector cleaner through them. I'll let everyone know the results after I'm done cleaning them out.
     
    #10 metrogtiguy, Nov 24, 2021
    Raytheeagle, ASRDogman, Aaron Vitolins and 1 other person like this.
  11. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,424
    3,413
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It would probably be best to back flush them. From the nozzle to the where the fuel line attaches.
    You don't want to push the "mess" toward the nozzle.
     
    #11 ASRDogman, Nov 24, 2021
  12. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,675
    1,716
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    I would suggest replacement or sending them out to a place that has an ultrasonic cleaner. Even if you can get them to unstick, you will likely have problems with poor flow and uneven spray patterns. Most cleaners can't do enough on really bad injectors.

    Also, I don't think a 9V battery is enough to open a 12V injector coil. You don't want 12V (with full current) for too long (a couple second at most) but you need enough to make it work.

    Posted via the PriusChat mobile app.
     
    #12 mr_guy_mann, Nov 25, 2021
  13. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    Update: I've cleaned them out, and they spray beautifully now. Put everything back together, and now I'm getting no start still. No codes besides "Engine did not start". No misfires, nothing. Fuel pump seems to be working great. I can feel the fuel rail get cold, so fuel is flowing.
     
    #13 metrogtiguy, Dec 22, 2021
  14. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,913
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Nine volts for checking out injectors is exactly what was suggested to me by Rich Jensen, who ran the cleaning service we were sending injectors out to in the days of the PriusChat injector exchange.
     
    #14 ChapmanF, Dec 22, 2021
  15. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    Ok, I've done lots of diag work this week.
    Compression is 180psi across all 4
    I have fuel, and spark

    I bought a 257v LED driver to grid charge the pack.

    My question now is, will this thing shut down a running engine if it detects a problem with the HV battery?

    Also, who sells a HV fan controller, so I can run the fan while its charging?
     
    #15 metrogtiguy, Dec 28, 2021
  16. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    I would say so
     
    #16 tankyuong, Dec 28, 2021
  17. metrogtiguy

    metrogtiguy Junior Member

    Joined:
    Oct 25, 2021
    21
    5
    0
    Location:
    Bradenton, FL
    Vehicle:
    2014 Prius
    Model:
    Two
    Ok, so i bought a known good ECU for it. Now, I can get it to rev up for the first time ever! Looks like that ECU was fried.

    Now, it revs up, and then shuts down with a P3190 - poor engine power. Anyone know what the chart in Techstream should look like? No idea what under the snowflake is actually a bad reading.
     
    #17 metrogtiguy, Dec 29, 2021
(You must log in or sign up to post here.)