Hi All, New to this website. I have a 2013 Prius C One. Both tail light assemblies became cracked/unsealed leading to water collection and moisture in the assembly. I have new OEM assemblies to replace the cracked ones. Can anyone give me any pointers or direct me to a video on how to disengage/remove the LED brake light assembly? I can disengage all of the wires but can't figure out how to remove the LED assembly to swap into the new tail light assembly. The part I need direction on how to disengage is #4 in the attached diagram. Any help appreciated. Thanks! G Pow
I had to swap out one of my taillights, due to the same problem (and I don't think the taillight had been hit by anything other than the glue/seams started to come apart)...so it could be an issue with quality of the OEM taillights in general? Although it never got to the point where it shorted/messed with anything, it just got pretty bad seeing a puddle of water at the bottom of the taillights. If I remember correctly it was sort of a plug and play after removing all the wires and freeing the taillight (unless the replacement you bought didn't come with that #4 lights). I'm thinking that if it's held in place by that screw, then remove screw, and the ole twist to unlock then pop out (like how you popped out all those wires).
