I started a “conversation” about this “dilemma” and, now that I figured out how, I thought I’d start a public thread and maybe get some more ideas. There were several codes that showed after it died but no check engine light until after it died: C1259, P0300, 0301, 0302, 0303, 0304, P3190, P0171, P3190, P3000, P3101, B2799, P3009, C1521, C1522, C1571, C1572 This came from my OTC scanner. After I cleared the codes I initially got: P3191, P3000, P3004, P3101, P3140, P3030, C1259, C1521, C1522 Again with my OTC Because I was stumped and had the time I swapped HV batteries with another gen1 I have that had no known issues and also finally used my Mini VCI with the Toyota tech stream software and checked with it. I also cleaned the inside the TB and manifold because of the p3191. After the battery swap tech-stream gave me a c1259, p3191 and p3030 and still no-start, hence the p3191. What ever is causing the no-start is cutting power to the fuel pump (I used a jumper wire to force power to the fuel pump and it pumped fuel when I removed the pressure line with key on on position). With the jumper wire in place it still wouldn’t start so the problem is also cutting power to the coils and/or the injectors. I swapped the battery back to the original one that was in it when the car died and now it still won’t start but the p3030 is gone anyway. What I have left is p3191 (obviously) and c1259 and I’m out of ideas. I want to thank Patrick Wong, 3prongpaul and bwilson4web for checking in on the “conversation” I originally started with and their help getting me through some tests to get me to this point. Although I’m still stumped I have learned a lot so far. Anything anyone could add will be appreciated. Thanks for looking in, Vaughn iPhone ?
