Separate names with a comma.
i think the 151r i got was 109 with a 3 year replacement up to 8 year prorated. the 51r seems like better value tho, i think you can get one...
Do you remove the entire hold down and put a board or something? 151R...
i think i tried 51R in the past and it was too large you have to bend the supporting metal piece away 151R seems to fit but has less capacity.
i guess you can't move individual posts
Good to hear yours is in good shape also. Sounds like you've dropped it both times. For engine oil I usually end up using 3.9 but I usually let...
Thanks for the tips. I had a partial quart so I ended up filling to 4.7 quarts on the slight incline and there was no overflow. I didn't get a...
Just drained the transmission fluid and dropped the pan at 63k miles. A good amount of sludge on the bottom of the pan and around the magnet....
Ended up changing just the inserts for some generic silicone ones. hopefully they last at least a few years. It was pretty difficult to release...
The rubber part of my blades came off. Never replaced wiper blades before. Does it make sense to get the inserts or replace the entire blades...
Is this a common problem on the gen 1's? Does replacing the brake fluid regularly help to lower chances of failure?
Found a little jelly near the radiator cap and at a little at bottom of the engine coolant reservoir. Coolant was a bit dark compared to the...
Jacking up the car.. Think I found the engine coolant drain. It's below the exhaust pipes. Also better shot at the transmission fluid drain...
I just had a missing lug nut and bolt and was wondering if it could cause the wheel to not rotate fully straight. And don't believe the car has...
hmm would a missing lug nut in one of the front wheels cause drift?
Does the steering nut issue cause the car to pull to the left or right sometimes when on the highway?
I found these photos from somewhere else. Not sure if i can post the link here. It looks like plug on the black pan is for the transmission...
Thanks! Had to jack up the other side, but turning the wheel allowed space to use a breaker and got it off! Had the bent the flange behind...
can probably the bolt with a lighter but how do you fit a breaker bar or impacter into the wheel well?
Finally had a chance to get to this and found the brake caliper bolt (17mm) are impossible to loosen? Want to confirm that since the bolt is...
Haven't done a coolant drain before in any car, much less a Prius. Are these the correct locations? Thought I take some pics, so no one else has,...
