Separate names with a comma.
I recently replaced my headgasket on my 2012 prius. During the replacement I also replaced my water pump, pcv valve, and cleaned my egr cooler. My...
The regenerative braking helps the front as long as your not mashing on them. I went through 3 sets of rear pads before changing the fronts. I...
I realize this whole thread has lasted a while as I have ran into a couple issues during work. After getting timing cover off I happen to break a...
I noticed that earlier. That video was much better than thier others ones due to the fact they explained things alot better and the view was...
Already have one made with flat steel stock and grade 8 bolts to screw into pulley holes and plant to floor. SM-N960U ?
I ordered a aisin water pump from rockauto and received it the other day. LOOKS IDENTICAL. However its looks like someone thought it was a weapon...
And for the record I ended up purchasing a impact that had no trouble at all breaking the pulley bolt loose. 750 ft- lbs of fastening torque but...
Finally got everything removed. Had some issues that made my heart stop for a bit. That issue has been resolved. Does anyone know the thread size...
Well I went on and started tearing everything down. Got all my fluids ready for replacement the only thing stopping me is the dang crank pulley...
How long does the HG replacement usually seem to take? I've found a few YT videos but they are all over the place. It should be able to be done in...
EGR cleaning has not been done before. SM-N960U ?
I am the proud owner of a 2012 prius five which I bought brand new with 4 miles on it. I have posted on here before regarding rusted slide pins...
I got the lube from auto zone. It's not Vaseline looking. It's black as coal. "Synthetic" and no parts are not Toyota they are AutoZone duralast....
That's another thing throwing me off. I ordered new pins for 2012 prius and new ones are shorter with a smaller cut for the rubber pin gasket. And...
I used the brake and caliper grease that I bought at auto zone. Other 3 pins look great. Apparently not enough lube on one pin. Now I need to get...
Inner pad and slide pin
The hardware I'm referring to is the hardware that clips into caliper mounting brackets that the pads slide against. As far as the piston cross...
So first a little info. I currently have a 2012 toyota prius five. About 140000 miles. Have replaced rear brakes once and working on second time....
