Separate names with a comma.
I converted my hybrid battery gen 2 to lithium. Should I make a thread or just keep it on my you tube channel
Around 185K but the cars 14 years old. The thermostat had some rubber distortion and the mechanical portion of it didn't depress smoothly
I'm going to close this thread turned out the problem was a stuck thermostat and I replaced it with one from Napa and it took a while but after...
So it seems I have multiple problems at the same time. I replaced the sensor, but it appears to be a stuck thermostat as I have no cabin heat and...
Having hard time checking anything right now so much rain here in Florida. Thank you for your prompt reply. So far I checked the censor it seems...
Hello all, in the past 2 days p11 18 has appeared. It included a drivetrain failure warning but that highly believe is due to some bypass mode to...
I checked it today and the codes are still present regardless of the issue being fixed. Perhaps I need a scan tool (tech scan) instead of a obt 2.
I'll give it a go but it's not for the faint if heart and requires a swear jar.
I'll check but I noticed that I still have transmission codes that came up under a bad hybrid battery. I replaced two of the cells within the...
That was it. Sorry for the trouble . I found it by touch not by sight. I was so focused from those HV cables and configuration everything else...
It might boil down to this missed wire
Sooooo......I may be a baaaadddd boy. I found a six pin wire coming from the inverter about 6 inches long. I might have to remove the whole...
Thanks, I replaced the brake actuator and had to r and r the inverter. Can't for the life of me see anything different that could occur. I found...
The dash is fine. The codes came from holding AC button, recirculation then start start without depressing break pedal resulting in diag codes...
Hi I just did a brake actuator replacement which involved removing and reinstalling the inverter after doing so my AC no longer worked. I have...
Here is a brilliant feed for future reference for any other new people like myself. It s u own the whole system out of the car. Brilliant work...
Thanks, looks like the resister feed of HV of the smaller relay had an almost broken wire. I made a temp jumper and my car finally started. Will...
Yes have tried jump a starting, I've disco the neg, reset codes, and today removed and gave a solid 12 volt supply to the two main hybrid relays....
What happened with this post. I have the same issue, same code. Relays not open to allow power thru. I don't expect it to be relay though. If...
Thanks for all your replys, so here we go. Received scan tool today and pulled P0AA4 which is negative contactor stuck closed, also before scan...
