Separate names with a comma.
I was hoping one of the other 2 problems caused it too. Wasn't sure what was good or bad under load, glad to hear that is good. I remember with...
[ATTACH] [ATTACH] Here are the pics of the connector
Sorry for the delay I got a little distracted with some other things. With the capacity I was just going to use a few different points and get a...
Stabilized at 348ma at 200v, seems to be good for now. The voltage only took an hour to get back up up 200v
I was thinking about doing the grid charge followed by car charge, but won't the charger do a better job of balancing than the car?
Quick question, I went out to dinner and came back and it dropped to 50v. I plugged the charger in and now the current is jumping all around from...
Ok sounds good. I am logging time and voltage but i didn't get the ammeter so I'm going to have to calculate the current. Down to about 100v now.
Thank you for the clarification. I am at the 25w bulb phase now from 140v to 84v. It's been discharging with the 25w bulbs for 6hrs and it's...
Greasemonkey, Thank you I got it working without a virtual machine. Steve, I think I misunderstood the instructions. I though I was to fully...
That's encouraging, I plan to do 3 cycles. Starting with 150w bulbs to 170v, then 60w bulbs to 140v, then 25w bulbs to 100v. Not sure about the...
I wasn't sure about starting it up while everything was out of balance so I was hoping the paralleling would at least allow it to start without a...
Some updates: Since I was charging my modules wrong I don't really know the capacity of any of them. I was just charging to 8v instead of...
My friend gave me a spare pack he has, minus 4 modules, so I can take whatever I need from that. I'll get everything put back together so that I...
I did read through that thread yes. I couldn't find any substance on the modules other than some dust. I did try cleaning them anyway but they...
If needed, which it sounds like I do, i was looking at the hybrid automotive prolong grid charger and it comes with a connector to discharge it...
I'm not at home but I believe they were both close to 7.77v
The 2 modules I took out had voltage readings when I tested from the terminal to the case, there voltage readings weren't really that low compared...
Thank you for the input. Here were the voltages when I opened it up, I took the two modules that we leaking voltage out. 1. 7.87 2. 7.92 3. 7.87...
Hello I have a 07 prius with 113k miles. It recently displayed the red triangle with code p0aa6 sub code 612. I took apart the battery and...
You are awesome, the connector was not seated properly. Pushed it in and now it works properly. Thank you so much!The connector on the heater...
