Separate names with a comma.
Interesting...... I would’ve never guessed that, yet it makes sense!
The cluster is upside down in my bench in these pictures, the circuit boards would normally be on bottom. [ATTACH] [ATTACH]
Hey all, I helped out a friend yesterday with the infamous no dash display combined with car not shutting off properly issue. We swapped out his...
Good to know! I do plan to install the complete dash cap assembly from the ‘05, (instruments & airbag) as these were all removed from the ‘08.
Hey all, dredging up an old thread here as there seems to be a lack of resources on this. Has anyone ever swapped a 2008 instrument cluster...
Pm sent!
Does anyone know if the digitizer screen is removable from the MFD, & if they are all the same? My wife has an ‘06 Navi with a failing digitizer...
UPDATE: I finally had some time to get it on my lift & poke around. Turns out (ironically) the vibration dampener pellet on the lower engine...
For some reason the video wouldn’t load yesterday (probably too big). I scanned it today, no pending or set codes in any of the 3 modules. I...
The camera distorts the sound like a high speed rod knock, that noise is actually the dash/console plastics vibrating
I haven’t tried scanning any codes yet, all dash lights are normal. MPG!/ si far as I know we’re normal, last week I noticed it seemed like I had...
Going to work today (22 mile cummute) about 1/3 of the way there I noticed a deep low rumble, definitely a bearing or axle noise. It did not...
I just noticed this on mine too! It’s an ‘04, it survived all this time until the end of summer here & now this.... I already have some...
What pins did you need to swap? On the MFD? The ‘07 only has a camera, no Nav & no Bluetooth. I was looking at 2 options: 1. Using the 07 MFD &...
I apologize if this has been covered, a few days of searching hasn’t completely answered my query. Firstly, I do know of the differing screen...
That would work, if you only have 220 & not 240 you might be limited to a lower max available charging current, & you would only be able to...
For discharging, I used two 100w bulbs in series across the pack, which gave me around 0.7a rate so as to not overheat the pack. I made a...
I'm actually working with my father on a possible production design for an affordable one with better safeguards. This creation I made did the...
WARNING: THIS CHARGER IS NOT AUTOMATIC AND SHOULD BE MONITORED CLOSELY UNLESS BEING USED AT A 0.2 AMP RATE OR LESS!!! PRE PLANNED TIMED CHARGE...
Construction was done in a few hours, roughly a week in the research/engineering, a few days of cycling/charging/testing in afternoons after work.
