Separate names with a comma.
Can anyone suggest a relatively easy way to provide 12 V power to the vehicle while troubleshooting? I've tried running it off of another vehicle...
I'm going to pick up a skid ECU sometime this week and try it out. I'm lucky enough to have a local yard that lets me borrow parts and just pay...
I found that my DOME fuse was blown. replaced it with the spare of same rating and things got better. Now I only have these codes: C1203 -...
I relied on visual inspection of the fuses but that would explain a few things. I will look into this and report back.
So I found a fusable link with the correct amp/volt rating and soldered it in place with high heat solder. Should be as good as original (not as...
[IMG] Okay So I know no one has even replied yet but I found the issue. It seems at some point the 100a fuse link blew in the fuse box. Only...
So I've been working on this 2005 prius with smart key and I'm stuck. I had the auxiliary battery go bad months ago and i finally got around to...
Wow. A lot of great suggestions and information. Wong - Thats a very valid point that pair 14 may not have a valid connection. There was a fair...
I'll measure again but all the module pairs seem to be well within the 0.3V variance. I'll let it rest overnight and test again after some...
Took a spin with a HV multimeter hooked up the pack outputs (not relays) and total voltage never drops below 200V. I don't think it's the voltage...
Thanks JC91006. I've rebuilt several of these batteries before so I know the danger in a HV system, but I appreciate the warning anyway. I just...
I bought a 2005 prius which the owner said had a bad HV battery. I rebuilt the battery with the proper modules and it's all balanced just right....
I wouldn't say so much "tried" as in made a totally bonehead mistake. Anyway I'll be around.
Yeah, that's what happened to me. I was left guessing because I didn't have the right scanner. Lesson learned.
uart - I'm positive I tried all the variations of disconnecting the 12v, starting, restarting, the service plug position, etc. I'm thinking that...
IT LIVES!!! The dealership technician said he made sure all the connections were solid and cleared the codes and it powered up fine. Only...
When I tested the the contactors I had a multimeter in continuity mode attached to the circuit leads. When I applied my 12v current the leads...
I can't vouch for the continuity of the contacts. I figured if I heard it clicking it's circuit closed that that all was well. that may have...
Okay these are my thoughts Battery ECU: Good, since I replaced it. HV Relays: Tested with 12v source Resisitor: Had continuity ECM: No way to...
Further details on that code were P0EA0-228 Which returns "Open or +B short in SMR3 (CON3) circuit" Problem area: Wire harness or connector,...
