Separate names with a comma.
Does this mean you don't have the tires any more?
A couple of such "dead" situations and the OEM battery is known to then become unrecoverable requiring a replacement. I would a. put the 12V on...
If Jiffy Lube also can't pull codes, I would try the Toyota dealer.
Also, steel rims for the snows might be less expensive than alloys, but not sure if they will be prone to rust if they sit in the garage for too...
Another option would be to get a disconnect switch that you can switch on and off either manually or remotely. You will lose radio presets, trip...
Considering it's a chore a get to the battery terminals, you might consider fitting something like this to your battery terminals with the...
You can test at the front hood jump points itself for an accurate reading. This will be the same as reading at the battery. Sounds like you don't...
I would especially like the ease of getting these off of a scanner/reader since the Prius tire pressures seem to vary quite a bit with the outside...
Too lazy to use either for a pressure check :) My understanding (perhaps incorrect) is that the TPMS sensors already have that info, hence my...
If you put it on a maintenance charger while in storage, you might end up with a 12V pretty close to being new (or not). Worth giving it a try...
ScanGauge II (Firmware 4.02) shows about 0.23V less that what it actually receives ( at least on mine). So, if the SG is showing 11.9V, the real...
Are there any cheap TPMS pressure readers that anyone is aware of, that can display the pressure readings from the 4 sensors?
Are you referring to the miniVCI that comes with a TechStream "like" DVD? I see some that say 2012 in the title/description. Would this suffice?
Can you list the Prius specific ones, if you aren't referring to Toyota TechStream? Thanks.
Congratulations! When you get a chance, can you please post info on how you were able to rescue the HV battery by the 2 replacement cells and...
Not sure. I normally drive the car in ECO but recently haven't been regularly in ECO mode. I will pay attention to the mode next time. Thanks.
I have noticed that when I go on a longer trip and then stop at 170F or more for a short stop, then after turning the car on (the SGII still...
I have a ScanGaugeII and I do also have the navigation pkg. Is it possible to read the pressure readings with either? If not, is there anything...
I did some testing this evening. The voltage at the jump point is identical to the voltage I saw at the cable that plugs into SGII; I used a...
How and what would I use to flush the tube the PVC hose is connected to? Is WD-40 OK? Thanks.
