Tombukt2

And where might this person be Can this person do anything does he have tools of any sorts or is this just like somebody's kid they need to plop in a car because they need them to go away?

He has some tools and knowledge. Mechanically inclined.

Look man I deal with a lot of incompetence everyday complete and other morons I have your stuff ready to go I need to look and see if I have your address You have my phone if you still need the stuff let me know I'll break it down tonight and get it in a box

I was using that as a locator I know people all over the country that work on these vehicles and other things Tell me where you are basically

I'm at 9198920363 too

Text my phone if you do that 919-892-0363 I can get you sorted out two or three different ways not an issue Happy to help

Yes. Rust free. No salt on the roads in CO. Garage kept.

https://priuschat.com/threads/coming-soon-2008-prius-127k-miles-for-sale.241670/

What do you think of the photos?

If you text my phone if you do that sort of thing I can send you some pics and won't be limited to this 420 characters in nonsense You won't have to bend over too much this is these two things I'm talking about are quick and you can stand pretty much straight up You might bend over for a second to undo the map sensor but nothing serious I mean a slight I don't know 5° bend over maybe I have sciatica and a bad back

And I'll send you the part numbers tomorrow afternoon for the ones I ordered they're like $12 a piece I ordered two two different makes they all look the same and they fit hundreds of cars

Do you work for Nabisco You know the cookie company

Oh you have no way to do this at home or in the apartment parking lot or what have you I mean it's just two 10 mm in a plug spray it off with the carbon choke cleaner look down the whole see if there's any oil build up if there is give it a shot in the hole let that stuff air out put it back on and start the car

Here here again a coat hanger say 13 14 in long with a half inch bend on the end take off that metal tube going to the intake from the EGR cooler and run that down the intake manifold use your shark rocket or your shop vac pull a vacuum on that hole that you just ran the reamer down that pulls most of the crap out

9298920363 You can text or whatever and maybe not have the 420 character limit or something

What I can tell you on your intake If you take off the metal pipe that goes from your cooler to your plastic intake set it aside of course make sure it's clear and run a reamer down that plastic intake that's the passage that connects the four ports the ports

You can lose and all that stuff up with a coat hanger then suck it out with a shop vac and then just blow on the end of the plastic intake where the metal pipe goes and you'll be able to blow through there no problem I would be seriously shocked if they're that clogged on your car at 30K no matter what's been going on with the car That's not enough time for anything to

Initially no was everything was flying under the radar when the rough running fart noise card in the spokes noise started when it got worse Yes and I will tell you what they are

I'm looking for my notes I can tell you one was poor engine performance engine failed to start is the other one and there were two more and as soon as I cleaned the MAP sensor that stuff was gone I've never seen a map sensor make a car run like it was going to fall apart I've seen a lot of them go bad in other cars in other cars