xjgary

Just thought I'd say what's helped me. Let me know how it's going for you.

Brett

For the seat adjustment, there is literally only one singular seatback position that can work for me in car. I happen to slide the seat 3 'clicks' forward from full back. Legroom a little tight, but it's a compromise. I lower down to just about all the way and pick up a little support for right knee with a 1/2" piece of neoprene taped to the side of floating bridge console.

I put my left elbow on that slab of foam probaly over 80% of time when driving, so it's really important. The door armrest is a good inch or so too low and brick hard to boot.I spent a few hours sewing a cover over foam for the center armrest too and use my right hand about 4 o'clock on the wheel a lot of the time.

cont'd..
I hated putting a slab of foam onto the door armrest of this $25,000 car, but that's what I did. I also struggled, how the heck does one adhere a piece of foam on fabric without damaging the fabric??? I came across 3M brand Command brand poster strips that advertised strong hold, removes cleanly. Best solution I've found.

Hi xjfary, you may have seen my responses to your complaint about your Prius seat and first off, I know exactly what you're saying as I've been dealing with the same things.

There's no way I can reach my arms out to 9 and 3 o'clock or 10 and 2 o'clock for much length of time and steer this Prius, wheel is too far away for that.