1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Not exactly a mod...but...

Discussion in 'Gen 3 Prius Accessories and Modifications' started by stream, Jun 14, 2009.

  1. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    The interiors of the glove boxes are hard plastic and if you have hard objects in them (CD cases, etc.) you can hear them rattle when you go over a bump in the road. It seems every other car I've owned had glove boxes lined with some sort of cushioning to muffle the sounds.

    I use the top glove box for papers so it's not an issue, but I didn't like all the rattling coming from the bottom one, so I got some black felt with adhesive backing and put it on the floor of the lower glove box. Much quieter now.

    BTW--I removed the glovebox and put it on my kitchen table, which made the process much easier (instructions on p. 449 of owners manual).
     
    #1 stream, Jun 14, 2009
    3 people like this.
  2. Dolce

    Dolce Junior Member

    Joined:
    Jun 6, 2009
    61
    9
    0
    Location:
    Chicago
    Vehicle:
    2010 Prius
    Model:
    II
    Great idea, thanks. I would say you have a legitimate, easy and inexpensive mod. I just wish there is a way to expand the lower glove compartment to something bigger. I am used to a previuos car that held a lot more stuff in 1 large compartment instead of the 2 smaller boxes in a Prius. My previous car also had a locking glove compartment, making it easier for me to store valuables like GPS and other electronics in it.
     
    #2 Dolce, Jun 15, 2009
  3. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    I'd also put a vinyl strap or even a webbing strap across the back of the lower glovebox to hold the owners handbooks out of the way. I think that is one of the few ways Toyota went backward with the Gen III Prius, dropping the slot at the back of the glovebox for the handbooks.
    Use an old webbing belt or some old seatbelt from a dismantler, attach with pop rivets and washers or small metal thread screws, nyloc nuts and washers.
     
    #3 patsparks, Jun 15, 2009
  4. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    I keep the case of handbooks in the storage area under the cargo area floor, along with a bunch of misc. stuff. My experience is once you've owned a car for a short time, you hardly ever use the manuals so why take up glove box space.
     
    #4 stream, Jun 15, 2009
    2 people like this.
  5. charlieh

    charlieh Junior Member

    Joined:
    Jan 29, 2004
    54
    1
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    IV
    I agree! I immediately missed the slot for the owner's manuals. Your webbing idea is very good!

    Charlie
     
    #5 charlieh, Jun 17, 2009
  6. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    Great idea! I'd heard of it before, but didn't know what material was being used. Can you provide that info, including where you got it, how much it cost, etc.

    And how about some PICS!?
     
    #6 a priori, Jun 17, 2009
  7. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    It's felt with adhesive backing, that came in 9" x 12" pieces (you'll need 2 since the glovebox is ~14" wide). $1.29 each at Michael's. Any craft store should carry it.

    Pic below.
     

    Attached Files:

    #7 stream, Jun 17, 2009
    Dylan Doxey, MaggieMay, PriusCrazy and 3 others like this.
  8. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    Nicely done! And; Thank you for the quick response and photo.
     
    #8 a priori, Jun 17, 2009
  9. dmvp

    dmvp Member

    Joined:
    Jun 16, 2009
    364
    54
    9
    Location:
    Outskirts of Chicago
    Vehicle:
    2010 Prius
    Model:
    IV
    Similar to you, I wanted to use the upper portion of the glovebox to hold my clip sunglasses (and my husbands) along with my cell phone charger. I bought one of those little black vinyl? rectangles that are designed for the dash to keep your cell phone from sliding around. The nice thing about that item is, it doesn't have any adhesive to worry about when removing.


    DSC_8204.jpg

    And I know there is a sunglasses holder on the roof, but my little clip-ons get lost in there! :)
     
    #9 dmvp, Jun 17, 2009
    2 people like this.
  10. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,341
    920
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    On the solar roof versions, we lose the glasses holder :( - I just toss my clip-ons under the center console where others suggest a "purse". Between that and my company badge, that area is working out just fine.
     
    #10 HTMLSpinnr, Jun 19, 2009
(You must log in or sign up to post here.)